Digital
Link Corporation Products
First known under the name Digital Link™ Corporation, pioneering wide-area network connectivity in the eighties and nineties, Quick Eagle Networks has been successful for many years in its pursuit of new techniques to improve and expand the science of WAN access technology. Quick Eagle Networks™ Inc. is a provider of wide area network (WAN) access solutions for broadband applications.
CALL US AT 1-301-924-7400 ext. 17 for Information or a Quote
4260 Serial WAN Probe
The 4260 Serial WAN Probe enhances networks already equipped with NTUs with
network performance monitoring capabilities (currently only available for E1).
The 4262 Network WAN Probe (T1 to T1 or E1 to E1) is the newest addition to Digital Link's family of intelligent WAN access platforms and IP probes. The 4262 Network WAN Probe measures throughput, availability, and latency in real time on the entire IP link.
The Management Access Processor (MAP) extends Digital Link Networks flexible management portfolio. The MAP connects directly to an Ethernet link providing simultaneous SNMP and telnet access to the Digital Link Networks products.
MULTILINK ACCESS
4250 Multilink
FR
The 4250 Multilink Frame Relay provides high speed standard based Multilink
Frame Relay (FRF.16) over 2xT1/E1.
5850 Multilink
FR
The 5850 Multilink Frame Relay access device (available for NxT1/E1) offers
standards-based inverse multiplexing capability and interoperates with the new
generation of carrier-class multi-service switches.
DL3800 Inverse Multiplexer
The DL3800 Inverse Multiplexer connects high-speed data terminal equipment to
multiple T1 or E1 links, providing aggregate data rates up to 12.224 Mbps (T1)
or 15.808 Mbps (E1).
ACCESS MULTIPLEXERS
4220 Multiplexer
The 4220 Access Multiplexer allows you to integrate data from two routers and
voice from PBX onto a single T1/E1 network.
DL3100 MUX
The DL3100 Access Multiplexer allows you to connect up to two high-speed data
terminal equipment (DTE) devices to a public or private T3/E3 network.
DL3150 MUX
The DL3150 Access Multiplexer is a cost-effective alternative to Digital Link’s
DL3100 Series, which enables you to connect your data terminal equipment (DTE)
devices to a public or private T3 / E3 network at full or sub-rate speeds. The
unit comes with a single HSSI port and supports symmetric and asymmetric data
rates of up to 34.2 Mbps (in 358 Kbps increments for E3) or 44.2 Mbps (in 300
Kbps increments for T3).
DL3155 MUX
The DL3155 Access Multiplexer is a cost-effective alternative to Digital Link’s
DL3100 Series, which enables you to connect your data terminal equipment (DTE)
devices to a public or private T3 / E3 network at full or sub-rate speeds. The
unit comes with a two HSSI ports and supports symmetric and asymmetric data
rates of up to 34.2 Mbps (in 358 Kbps increments for E3) or 44.2 Mbps (in 300
Kbps increments for T3).
ROUTERS
DL700 ADSL2+ Router
Designed specifically for the small business and remote office market, the
DL700
ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing
Ethernet switch, stateful inspection firewall, WLAN access point, QoS
capabilities and VPN functionality.
DL710 ADSL2+ Router
Designed specifically for the small business and remote office market, the
DL710
ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing
Ethernet switch, stateful inspection firewall, WLAN access point, QoS
capabilities and VPN functionality. Compared with the DL700 ADSL2+ Router, the
DL710 comes in addition with two FXS and one FXO port to enable VoIP
applications.
4335 Access
Router
The 4335 Access Router is a scalable (up to 2xT1/E1) branch-office router that
comes with two Ethernet ports (10/100 and 10 BaseT). The second Ethernet port
might be used for redundant fail-over to a backup VPN link by connecting to a
DSL, cable, or last-mile wireless modem (likely with a VPN appliance between
router and modem). The second port could also be used to load-balance LAN
traffic. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an
optional bandwidth shaper turn this router into a multifunctional device.
5840
Multiport Router
The 5840 Multiport Router (available for NxT1/E1) is a bandwidth scalable (up to
12 Mbps), IP aware, intelligent WAN access router, offering standards-based
inverse multiplexing (NxT1/E1) and multilink capabilities. An integrated
CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth
shaper turn this router into a multifunctional device.
5842
Multiport Router
The 5842 Multiport Router (NxT1/E1) is bandwidth scalable (up to 8 Mbps), IP
aware, intelligent WAN access router, offering standards-based inverse
multiplexing (NxT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN
Probe, stateful inspection firewall, and an optional bandwidth shaper turn this
router into a multifunctional device.
5844
Multiport Router
The 5844 Multiport Router (4xT1/E1) is an IP aware, intelligent WAN access
router, offering standards-based inverse multiplexing (4xT1/E1) and multilink
capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall,
and an optional bandwidth shaper turn this router into a multifunctional device.
BRIDGES
5842 Multiport Ethernet Bridge
The 5842 Multiport Ethernet Bridge is ideal for medium-sized businesses, and
their branch offices, which need a MAC learning bridge that can extend the
office LAN over the WAN. The unit is scalable up to four T1/E1 WAN ports.
5844 Multiport Ethernet Bridge
The 5844 Multiport Ethernet Bridge is ideal for medium-sized businesses, and
their branch offices, which need a MAC learning bridge that can extend the
office LAN over the WAN.
4200 SDSL
Ethernet Bridge
As an Ethernet LAN extender
the 4200 SDSL Ethernet Bridge is especially suited
for high-speed data communications in campus environments or in CPE-to-carrier
edge connections requiring higher bandwidth but not requiring service
aggregation. The 4200 SDSL Ethernet Bridge's multilink technology bonds all
three SDSL links in a single multilink bundle to offer load balancing and link
resiliency. However, you can also deploy the 4200 SDSL Ethernet Bridge whereas
the three copper pairs are connected to different locations.
Ethernet Learning Bridge offering symmetric multi-megabit service on a
single-pair loop and an integrated 4-port Ethernet hub (repeater.)
CSU DSU
4210 CSU/DSU
the 4210 csu/dsu is an access device with a single DTE (available for T1/E1)
that supports Transparent protocol, Frame Relay, and Cisco HDLC.
Solo Select
The Solo Select product line adds incremental intelligence functionality through
RMON-based performance monitoring to the traditional CSU/DSU concept.
Solo Select T1 DSU
Solo
The Solo product line offers fully manageable CSU/DSUs.
The Solo T1 CSU
the solo t1 dsu
Prelude
The Prelude T1 DSU provides low-cost access to high-speed T1, fractional T1, and
frame relay services for data terminal equipment (DTE) such as routers and video
codecs.
Ensemble
The Ensemble WAN Access System
is a high-density, compact chassis that holds up
to 15 DSU or CSU modules..