Routers - Enterprise / Video / T1 / E1

Routers - Enterprise / Video / T1 / E1

Originally, general-purpose mini-computers served as routers. Although general-purpose computers can perform routing, modern high-speed routers are highly specialized computers.

A router that connects clients to the Internet is called an edge router. A router that serves solely to transmit data between other routers, e.g. inside the network of an Internet service provider, is called a core router. Routers connect networks together the way that onramps or major intersections connect streets to both highways and freeways, etc. The street signs at the intersection (routing table) show which way the packets need to flow.

A router is normally used to connect at least two networks. In recent times many routing functions have been added to LAN switches (a marketing term for high-speed bridges), creating "Layer 2/3 Switches" which route traffic at near wire speed.

Routers are also now being implemented as Internet gateways, primarily for small networks like those used in homes and small offices. This application is mainly where the Internet connection is an always-on broadband connection like cable modem or DSL. These are routers in the true sense because they join two networks together - the WAN and the LAN – and have a routing table. Often these small routers support the RIP protocol, In addition, these routers typically provide DHCP, NAT, DMZ and Firewall services. Sometimes these routers can provide content filtering and VPN. Typically they are used in conjunction with either a cable modem or DSL modem, but that function can also be built-in.

Data Connect Enterprise offers a full range of Routers
In Addition to the brands noted below, we carry routers by
NetGear, Linksys, Cisco, and others

IP Telephony VoIP ToIP Routers Gateways
Patton Electronics VoIP ToIP Products SmartNode VoIP Gateway Routers

ADTRAN ROUTERS

Adtran NetVanta Routers

Adtran Netvanta 1224STR

Wire-Speed Multiservice Access Routers

PATTON ROUTERS

Patton Electronics 2603, 2621, & 2635 IPLink Gateway Router IP

QUICK EAGLE / DIGITAL LINK ROUTERS

DL700 ADSL2+ Router

Designed specifically for the small business and remote office market, the DL700 ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing Ethernet switch, stateful inspection firewall, WLAN access point, QoS capabilities and VPN functionality.

DL710 ADSL2+ Router

Designed specifically for the small business and remote office market, the DL710 ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing Ethernet switch, stateful inspection firewall, WLAN access point, QoS capabilities and VPN functionality. Compared with the DL700 ADSL2+ Router, the DL710 comes in addition with two FXS and one FXO port to enable VoIP applications.

4335 Access Router

The 4335 Access Router is a scalable (up to 2xT1/E1) branch-office router that comes with two Ethernet ports (10/100 and 10 BaseT). The second Ethernet port might be used for redundant fail-over to a backup VPN link by connecting to a DSL, cable, or last-mile wireless modem (likely with a VPN appliance between router and modem). The second port could also be used to load-balance LAN traffic. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5840 Multiport Router

The 5840 Multiport Router (available for NxT1/E1) is a bandwidth scalable (up to 12 Mbps), IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (NxT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5842 Multiport Router

The 5842 Multiport Router (NxT1/E1) is bandwidth scalable (up to 8 Mbps), IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (NxT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5844 Multiport Router

The 5844 Multiport Router (4xT1/E1) is an IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (4xT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

OTHER MANUFACTURERS

3Com OfficeConnect Routers
3Com Router 3000 Router 3000 DSL
3Com Router 5000 Family
3Com Router 6000 Family

Adit 3402 T1 IP PBX Trunk Router

Coastcom R661 T1 E1 Router Bridge

Encore Networks MonoFRAD F9100 Encore EtherFRAD F9200 Encore Quick II TermRouter F9500

GDC Innovx NetPath VPN DSL Router
GDC GDC SpectraComm IP

Kentrox Q2300 Ethernet QoS Access Router Ethernet DSL Cable service
Kentrox Q2400 Dual T1 and Ethernet QoS Access Router

Multitech Frame Relay FRAD FRAID Voice-Capable Routers

RAD FCD-IPD Dual E1 Router

Juniper Routers

Contract Buying and Volume Discounts available !!

Please contact us 301-924-7400