|
FEATURES
- Optimux-4E1 is a multiplexer combining up to four
E1 channels over a single coax or fiber optic E2 link. A pair of
Optimux-4E1 units offers simple and low-cost connectivity for four E1
channels at distances up to 75 km (46 miles).
- Various optical interfaces are available:
- 850 nm for multimode fiber LED
- 1300 nm for single mode fiber LED
- 1300 and 1550 nm laser for extended range over
single mode fiber.
- An optional second link provides backup using
automatic switchover upon link failure.
- An optional second power supply provides power
redundancy and fail-safe operation.
- Optimux-4E1 transmits each of the E1 channels
independently, such that the clock of each E1 channel is independent of
the clock of any other E1 channel. The E1 interface can be 75( unbalanced
or 120( balanced.
- Optimux-4E1 is also available as a card for the
LRS-24 19" rack with central SNMP management. This option will provide a
compact cost-effective central solution.
- To facilitate system diagnostics, Optimux-4E1
features LED status indicators, AIS alarm generation, recognition and dry
contact closure upon link failure.
- Configuration, monitoring and maintenance can be
performed using an ASCII terminal or a SLIP connection to an SNMP
management station. Optimux-4E1in the LRS-24 rack can also be configured,
maintained and monitored using Ethernet, via the CL-2 card.
- The SNMP management supports:
- RADview-PC running on PC/Windows
- RADview-HPOV running on anHP OpenView UNIX
platform.
- A voice service channel is available for end-to-end
communication between maintenance personnel (available with fiber optic
link only).
- The standalone Optimux-4E1 is available as a
compact 1U high unit for mounting in a 19" rack.
- Multiplexes four E1 channels over a single E2 link
- E2 transmission over coax or fiber optic cable
- Operates with multimode or single mode fiber
- Laser diode option
- Range up to 75 km (46 miles)
- Voice service channel
- Conforms to ITU G.703, G.742, G.823, G.956
- Optional second E2 link provides automatic backup
- Optional redundant power supply
- Management via ASCII terminal or SNMP management
station
- Remote management using in-band channel
- Compact 1U high size
- Card version for LRS-24 19" rack with central SNMP
management
OP-4E1/*/R/#+/D
Four E1 Channel Multiplexer
OP-4E1C/&/?/#+/D
Four E1 Channel Multiplexer Card
for LRS-24
| & |
Specify LRS-24 rack type
F for ETSI version
B for ANSI version |
| ? |
Specify E1 connector type
TB for terminal block
SC for SCSI
U for unbalanced BNC |
| * |
Specify power supply
AC for 115 - 230 VAC
48 for -48 VDC
24 for 24 VDC |
| R |
Specify R for second redundant power
supply (optional) |
| D |
Specify D for second redundant link
(same type as first link) (optional) |
| #+ |
Specify link interface
(# for connector type, followed
by + for optical wavelength) |
| # |
CXfor electrical (standalone
version only)
ST for ST type connector
SC for SC type connector
(standalone version only)
FC for FC type connector |
| + |
85 for 850 nm, multimode,
LED
13 for 1300 nm, single mode, LED
13L for 1300 nm, single mode, laser diode
15L for 1550 nm, singlemode, laser diode |
ORDERING
OP-4E1-MNG-CARD
OP-4E1/48/FC13
OP-4E1/48/FC13L/D
OP-4E1/48/R/FC13L
OP-4E1/48/R/FC13L/D
OP-4E1/48/R/SC13/D
OP-4E1/48/R/SC15L/D
OP-4E1/48/R/ST13L
OP-4E1/48/R/ST15L/D
OP-4E1/48/R/ST85/D
OP-4E1/48/SC13
OP-4E1/48/ST13
OP-4E1/48/ST13/D
OP-4E1/48/ST13L
OP-4E1/48/ST85
OP-4E1/48/ST85/D
OP-4E1/AC/CX
OP-4E1/AC/R/CX
OP-4E1/AC/R/FC13
OP-4E1/AC/R/FC13L
OP-4E1/AC/R/FC13L/D
OP-4E1/AC/R/SC13/D
OP-4E1/AC/R/ST13
OP-4E1/AC/R/ST13/D
OP-4E1/AC/R/ST13L
OP-4E1/AC/R/ST85
OP-4E1/AC/R/ST85/D
OP-4E1/AC/R/STSF1
OP-4E1/AC/R/STSF2
OP-4E1/AC/SC13
OP-4E1/AC/SC13L
OP-4E1/AC/ST13
OP-4E1/AC/ST13L
OP-4E1/AC/ST85
OP-4E1/AD/ST85
OP-4E1/AD/ST85/D
OP-4E1L/B/AC/CX
OP-4E1M-ST13
APPLICATIONS
|
