FEATURES
- The FMC-101 Fiber Optic Mode Converter provides
transparent conversion of fiber optic signals at data rates up to 155
Mbps.
- FMC-101 converts between any combination of the
following wavelengths:
- 850 nm multimode
- 1300 nm multimode
- 1300 nm single mode.
- An optional laser diode can be ordered separately
to extend distances over a single mode fiber optic cable.
- FMC-101 supports a wide variety of protocols
including Ethernet, FDDI, Token Ring, and a variety of ATM rates (such as
OC 1, TAXI, OC-3 and STM-1).
- Bidirectional mode conversion is performed from 850
nm or 1300 nm on the multimode site to 1300 nm (LED or laser) on the
single mode side. A single unit is used for conversion between two devices
(see Figure 1); a pair of units is used for connecting a pair of devices
with multimode interface over single mode infrastructure (see Figure 2).
- FMC-101 operates at data rates up to 155 Mbps, and
supports most optical codes. However, multi-level optical codes and
uncoded signals are not supported.
- Built-in diagnostics support local and remote
loopbacks in compliance with ITU V.54 standard. Front panel switches allow
manual selection between normal operation and loop performance.
- FMC-101 can be ordered with either ST or FC
connectors.
- FMC-101 is supplied as a standalone unit. It can be
mounted in a 19" rack using the TR-RM rack-mount kit for installation of
one or two units.
SPECIFICATIONS
- Transparent conversion of fiber optic signals:
- 850 nm to 1300 nm
- Single mode to Multimode
- Supports data rates up to 155 Mbps
- Transparent to protocols
- Supports:
- Ethernet (FOIRL, 10BaseFL)
- Token Ring (IEEE 802.5J)
- FDDI (ANSI X3T9.5)
- ATM:
- 51 Mbps OC-1
- 100 Mbps TAXI
- 155 Mbps OC-3 (SONET)
- 155 Mbps STM-1 (SDH)
- Local and remote loopback diagnostics
- Available with ST or FC connectors
FMC-101/*/#
Fiber Optic Mode Converter
| * |
Specify optical interface 1 (Multimode):
85ST for 850 nm with ST connector
13ST for 1300 nm with ST connector
13FC for 1300 nm with FC-PC connector
85FC for 1300 nm with FC-PC connector |
| # |
Specify optical interface 2 (Single mode):
13ST for 1300 nm with ST connector
13FC for 1300 nm with FC-PC connector
13LST for 1300 nm, laser diode with ST connector
13LFC for 1300 nm, laser diode with FC connector |
TR-RM
Hardware for mounting one or two standalone units in a 19" rack. |
ORDERING
FMC-101/13FC/13FC
FMC-101/13FC/13ST
FMC-101/13ST/13FC
FMC-101/13ST/13LFC
FMC-101/13ST/13LST
FMC-101/13ST/13ST
FMC-101/85ST/13FC
FMC-101/85ST/13LFC
FMC-101/85ST/13LST
FMC-101/85ST/13ST
APPLICATION
|
