|
RAD AirMux-200 Broadband Wireless Multiplexer
Features:
• Carrier-class solution
• TDM transmission complies with all relevant telecom requirements
• Data rate of up to 48 Mbps
• Transmission range of up to 80 km (50 miles)
• High reliability and availability based on robust air interface
• Integrated solution for E1/T1 and Ethernet interfaces
• Compliant with FCC, CAN/CSA, and Chinese regulations
Description
• AirMux-200 is a carrier-class,
48 Mbps capacity, cost effective
point-to-point broadband wireless
transmission system. It combines
legacy TDM and Ethernet services
for transmission over 5.x GHz
unlicensed bands. It is suitable for
deployment in FCC regulated
countries.
• Short time to service period:
License-exempt spectrum
removes regulatory delays
Wireless connectivity instead of
private line leasing from service
providers
•Compact integrated system, easy
to install and operate.
• AirMux-200 provides high
performance and reliability. The
interface ensures low BER, as well
as low latency, and full
compliance with E1/T1 interface
jitter and wander requirements.
• Transmission range of up to 80 km
(50 miles) with an external antenna.
• The AirMux multiplexers consist of
an outdoor unit (ODU) and an
indoor unit (IDU).
• The outdoor unit is suitable for
mast or wall installation. Mounting
brackets are supplied with the unit.
Applications
• Broadband Access
AirMux-200 provides broadband access services, such broadband Ethernet and
leased lines, to Small and Medium Enterprises (SME).
• Cellular Backhauling
AirMux-200 connects between cellular base stations and cellular base station
controllers. This solution meets the requirements of cellular backhauling
applications by providing up to two E1/T1 interfaces and Ethernet traffic
for maintenance and control.
• Hot-Spot Backhauling
AirMux-200 provides a robust and more cost-effective alternative to the last
mile connection between the WLAN access point and the data network, compared
with the often used expensive E1/T1 leased lines.
• Wireless ISP Backhaul
Wireless Internet Service Providers (WISP) use backhaul to connect their
Point of Present (POP) to their network operation center.
With AirMux-200, WISPs have a higher capacity with a range of up to 80 km
(50 miles), bundled connectivity in a cost-effective package.
Ordering
AirMux-200/IDU/AC/UTP/*
Indoor unit with 10/100BaseT port and external AC/DC
converter
AirMux-200/ODU/#/^
Outdoor unit with 10/100BaseT port
AirMux-200/#/AC/UTP/*/%/KIT/!
Complete system for 10/100BaseT link, comprising two indoor
units (AirMux-200/IDU), two outdoor units
(AirMux-200/ODU) with integrated antennas and two cables at
specified length
Note: If kit is required without cables, omit the
% option.
# Specify frequency band:
f58 for 5.725–5.850 GHz
* Specify TDM interface type:
E1 for E1 interface
T1 for T1 interface
2E1 for two E1 interfaces
2T1 for two T1 interfaces
^ Specify EXT for outdoor unit with
dedicated connector for external
antenna connection
Note: If EXT is not specified, AirMux-200 is
supplied with integrated antenna.
% Specify cable length:
50 for 50m (164 ft) cable
100 for 100m (328 ft) cable
! Country Specific
C for China
|
