Patton Electronics SmartNode 2300
Modular VoIP Access Router

Patton SmartNode 2300
Modular VoIP Access Router
Patton’s SmartNode 2300 Modular VoIP Access Router creates a flexible enterprise solution for easy integration of voice and data. Scalable, intelligent, and multi-service, the SN2300 supports up to 60 simultaneous calls and is equipped with a Sync. Serial router with QoS, NAT, and Firewall.
 
SmartNode 2300 photo
 
  Features & Benefits
  • VoIP Gateway Router with dual Ethernet
  • 3 Expansion slots for ISDN, T1, E1, and FXS interface cards for voice processing features
  • V.35/X.21 serial interface
  • LAN-to-LAN connectivity
  • Voice VPNs
  • Real-time quality of service (TOS, Diffserv, and IEEE 802.1p/Q)
  • On-board DSP support multiple voice codecs
  • G.711 A-Law/µ-Law; G.723.1 (at 5.3 or 6.3 kbit/s); G.729A; Transparent
  • Euro ISDN EDSS-1/ETSI BRI/NET3
  • H.323v2; Q-SIG (PSS-1), and ISoIP (ISDN over IP)
  • Simultaneous compresses ISDN voice calls over the same IP link
  • Static firewall with NAPT and Access Control Lists
  • Industry Standard CLI, SNMP, TFTP configuration and software upgradeable
  • EMC & CE compliant
  • 1-year warranty
  • Optional Upgrade: 2-5 year Warranty
  • Optional Upgrade: 1-5 year Enhanced Warranty (includes free Advance Replacements)
 
Overview  


The SmartNode 2300 Modular VoIP Access Router is a single flexible platform for network data and Voice-over-IP applications. Ideal for the branch office or the small to medium enterprise, the SmartNode 2300 is performance-tuned for packet and voice. Equipped with dual Ethernet ports, a serial V.35/X.21 port, and three voice interface slots, the SmartNode 2300 scales up to 60 simultaneous calls in a 1U chassis.

The SmartNode 2300 connects your LAN to the WAN using PPP or Frame Relay (RFC-1490) eliminating the need for and cost of an extra router. With dual Ethernet ports and built-in QoS, NAT, DHCP, PPPoE, and ACL/Firewall, the SmartNode 2300 provides complete LAN network access control.

With Patton’s Telephony-over-IP (ToIP) programmable circuit-switching the SmartNode links any standard BRI, T1/E1 PRI, or FXS connection to the IP network. Supporting multiple codecs and T.38/Modem bypass, the SmartNode seamlessly converges voice, data, and fax over IP.

The SmartNode delivers IP network access with the clarity of toll-quality voice for a complete LAN, WAN, and Gateway solution.

Configuration Example: Office IP & Voice Access
The SmartNode 2300 Modular VoIP Access Router is an intelligent multi-service access device providing both routed LAN services and Voice-Over capabilities.

With its internal router and V.35/X.21 port, remote or local sites can access public IP services or private data VPNs without the added cost of a router.

Adding Voice-Over capabilities are a snap using any combination of field-installable voice and data modules. Now any site can connect VoIP to any phone with BRI, T1/E1 PRI, or FXS.

SmartNode 2300 application


 
Specifications


 

Data Connectivity Voice Routing—Session Router™ IP Quality of Services
1 10 and 1 10/100Base-T Ethernet, RJ-45

V.35, X.21 DTE

IP unnumbered

Packet fragmentation

Frame Relay (Q.922, FRF.12)

RFC 1490 IP over Frame Relay

LMI (Q.933D, ANSI 617D, Gang of Four)

Local switching

Interface huntgroups

ISDN broadcast message routing

Routing Criteria

  • Interface
  • Calling/called party number
  • Time of day, day of week, date
  • ISDN bearer capability

Number manipulation functions

  • Replace numbers
  • Add/remove digits
  • Multiple remote gateways
  • PLAR
WFQ/Fixed Rate/Priority Queuing/flow-split scheduler

Combination of QoS schemes with configurable burst

DiffServe/ToS set or queue per header bits

Pocket Policing discards excess traffic

802.1p VLAN tagging

Traffic classification and shaping

Voice Signalling IP Routing Operating Environment
Euro ISDN EDSS-1 / ETSI BRI/NET3
  • ETS 300 012-1 (ITU-T I.430)
  • ETS 300 402-1 (ITU-T Q.921)
  • ETS 300 403-1/2 (ITU-T Q.931)
  • ETS 300 102-1 (ITU-T Q.931)

Q-SIG (PSS-1)

  • ECMA-143
  • ETSI and ISO/ECMA channel numbering

SIP and MGCP

H.323v3

  • RAS, H.225, H.245
  • Fast-connect, early H.245
  • Gatekeeper autodiscovery
  • Alias registration
  • Overlap sending
  • Empty capability set (call transfer, hold)
  • H.323v1 call transfer, hold
  • ECS support

ISDN over IP (ISoIP)

  • H.323 GW and GK compatible
  • H.323 Annex M3
  • ISDN/Q-SIG feature tunnelling
  • ISDN speech, audio and data (Fax Gr 4, UDI 64, RDI 64)
  • ISDN supplementary services*
IPv4 router

RIPv1, v2 (RFC 1058 and 2453)

Programmable static routes

ICMP redirect (RFC 792)

Packet fragmentation

Static Firewall

  • NAT/PAT/NAPT (RFC 1631)
  • Access control lists
Operating temperature: 0–40°C

Operating humidity: 5–80% (non condensing)

Management
Industry standard CLI with local console (CRJ-45, RS-232) and remote Telnet access

TFTP configuration down-and upload

TFTP firmware download

SNMP v1 agent (MIB II and private MIB)

Built-in diagnostic tools (trace, debug)

Java™ Applet

HPOV Integration with NNM

System
CPU Motorola MPC860 at 50 MHz

Memory 16MB SDRAM/4MB Flash

Power: 100–240 VAC (50/60 Hz)

Power dissipation 30W (fully loaded)

Patton Electronics Products