• All Rate Operation 2.4, 4.8, 9.6, 19.2, 56 and 64 Kbps
• RS-232 and V.35 DTE Interfaces On Each Unit
• Desktop, Cluster and Rack Card Versions Available
• Rate Adaptation, Anti-Streaming and Automatic Equalization
• Special Control Port for Configuration and Diagnostics
• V.54 Compliant Test Modes
• Uses SMT and ASIC Technology
• 5 Status LED Indicators—TD, RD, CTS, CD, DTR
• 4 Diagnostic LED Indicators—No Signal, Out of Service, Error and Test Mode
• Low Power Consumption
• AT&T 62310 Compliant

With its high speed capabilities, the DigiLink I™ can operate at all common digital service rates (2.4, 4.8, 9.6, 19.2, 56 and 64 Kbps). We've even added a special control port, so you have easy access to configuration and diagnostic utilities. Nine easy-to-read LED indicators will always keep you informed of the 2500’s status.

And don't worry about getting the right interface version. The DigiLink I™ comes equipped with both RS-232 and V.35 interfaces.

For greater dependability, the DigiLink I™ uses specially designed state-of-the-art SMT and ASIC chips. These unique chips overcome the problems of heat-generated failures. In addition, these chips allow the DigiLink I™ to consume far less energy than ordinary CSU/DSUs.

We've also added a number of special tools. A specially designed line equalization feature automatically compensates for distortion and line attenuation. Meanwhile, V.54 local and remote loopback tests evaluate the condition of the CSU/DSUs and the communication link. The DigiLink I™ also features V.52 compliant bit error rate pattern tests.

The Patton DigiLink I™ is AT&T 62310 compliant, and fully compatible with Clear Channel™ and other DDS services available from major service providers including AT&T, MCI and Sprint. Naturally, the 2500 can function just as well on private lines or campus networks.

Get Organized: Our Miniature CSU/DSU Card Fits 19" Rack Chassis & Desktop ClusterBoxes™