Patton Electronics 2035 & 2039
High Speed, Auto-Directional
Serial to Parallel Converters

Models 2035 & 2039
High Speed, Auto-Directional , Serial to Parallel Converters
Models 2035 & 2039 Operate Like the 2025 Only Much Faster - 115.2 Kbps
Model 2035
  Features & Benefits
  • Auto-Directional Data Conversion
  • Data Rates to 115.2 kbps
  • Automatic Parallel/Serial Mode Selection (all Models)
  • Automatic DCE/DTE Mode Selection (Model 2035 & 2036)
  • Support for Both Hardware and X-ON/X-OFF Flow Control
  • No AC Power or Batteries Required
  • Integral 6 foot (1.8m) Cable (Model 2035 & 2039)?Custom Lengths Available

Patton?s high speed, miniature serial to parallel converters take the capabilities of our Model 2025 Series and boost them to serial data rates of 115.2 kbps! These tiny converters support auto-directional data conversion and can handle either hardware or X-On/X-Off handshaking?yet they require no AC power or batteries for operation. These converters automatically orient themselves for serial-to-parallel or parallel-to-serial data conversion. Other parameters?data rate, flow control, parity and word length?are set by externally accessible DIP switches.

Product Highlights

DB-9 (EIA-574) Versions Also Available

If you need to convert a DB-9 Serial port to Parallel or vice versa... You need the Model 2039

Model 2035db9



Data Rate: 9.6, 19.2, 38.4 and 115.2 kbps, selected by external switches
Data Format: Async., serial
Characters: 7 or 8 data bits, one stop bit
Parity: Even, odd or no parity w/ 7 or 8 data bits
Connectors: (see ordering chart)
DCE/DTE Orientation: Model 2035 & 2036 - Auto Sensing; Model 2039 - DB-9 configured as DCE, DB-25 or 36-pin configured as DTE
Power: No AC power required; uses ultra low power derived from the RS-232 data and control signals


Patton Electronics Products