|
Models 1205P & 1205PRC
|
|
|
Powered, V.35, Modem Eliminator & Rack Card
|
|
|
A cost effective solution for interconnection of terminal devices
located in proximity of each other |
|
|
y
 |
|
| Features & Benefits | |
|
|
| Overview | |
|
The Patton Model 1205P Modem Eliminator is a cost effective solution for interconnection of terminal devices located in proximity of each other. The use of two modems is eliminated, with a resulting cost savings to the user. This device is bidirectional with each port connecting to a DTE. The ME permits interfacing one terminal to another terminal without the use of two Modems. The ME provides sync baud rates up to 2,048Kbps. When an ME is used with async data, baud rate selection is not required because the Modem Eliminator is transparent to the data. Terminal devices can be separated up to 50 feet away from the ME depending on the baud rate selected. The unit is supplied with two female connectors for connection of the terminal units. The ME is available as either a stand-alone units or in a multiunit rackmount configuration. In the stand-alone configuration, the ME is housed in a sturdy aluminum enclosure and are supplied with a switchable 110V / 220V linear power supply. In the rackmount configuration, each ME occupies one slot of the
1010R16/P front load rack. The Model 1205PRC is the rackmount version
which fits into a slot in the 1010R16/P. The Modem Eliminator has an
internal linear power supply that operates at 110/220V switch selectable.
No bulky wall mount power transformers to clutter up your data center.
|
|
|
Ordering
Information 1205P: Powered V.35 Modem Eliminator; 110VAC, ME-V.35-SS 1205P-220: Powered V.35 Modem Eliminator; 220VAC, ME-V.35-SS 1205PRC: V.35 Modem Eliminator Rack Card, ME-V.35-RM |
|
|
|