Patton Electronics 1002
 Self-Powered, Asynchcronous Short-Range Modem
2-Wire or Coax

Patton Model 1002
Self-Powered, Asynchcronous Short-Range Modem, 2-Wire or Coax
The Best Choice for Data Only Applications Using Coax or a Single Twisted Pair
 
Model 1002
 
  Features & Benefits
  • Full Duplex Operation over Coax or a Single Twisted Pair
  • Data Rates to 19,200 bps
  • Range over 5 Miles (8 Km)
  • Easy to Install, No Strapping Required
  • Ultra Thin Case (.75"/1.9cm)
  • 2-Wire Connection via BNC, RJ-11, RJ-45 or Terminal Blocks/Strain Relief
  • FCC Approved?Part 15 Class A
  • No AC Power Required
 
Overview  

The Model 1002 miniature RS-232 short range modem operates full duplex over a single twisted pair or coax cable. Requiring no AC power for operation, the Model 1002 is available with male or female DB-25 connectors, and either strain relief, RJ-11, RJ-45 or coax line connections. The surge-protected Model 1002S provides 600 Watts per wire of protection against nearby lightning strikes and other transients.


 
Specifications


Transmission Format: Asynchronous
Transmit Line: 2 wire unconditioned twisted pair or coaxial cable
Transmit Mode: Full duplex
Transmit Level: 0 dBm
Control Signals: DSR and DCD turn ON immediately after the terminal raises DTR; CTS turns ON immediately after the terminal raises RTS
Data Rate: 0 to 19,200 bps (no strapping)
Range: Up to 1 mile (coax)
Power: None required, uses ultra low power from EIA data and control signals
Dimensions: 2.20" x 1.75" x .75" (5.6 x 4.4 x 1.9 cm)
Temperature: 32? to 122?F (0? - 50? C)
Humidity: 95% non-condensing
 

Patton Electronics Products