FibroLAN 10/100TX-FX Single Channel H.CON/MA series |
|
FibroLAN 10/100TX-FX single channel
H.CON/MA series
This series is based on
FibroLAN’s BMD technology (layer 2 MC). The device converts 10/100Mbps signals
from its RJ45 ports to 100Mbps (100Base-FX) on its F/O port and extends them up
to 40km. Its TP port operates at auto-negotiation mode allowing connection to
any type of Ethernet or Fast Ethernet device, disregarding its duplex mode. The
F/O port is set by default to 100Mbps FDX, ensuring maximal distance over the
F/O link . It is available with a variety of F/O connectors both single and dual
fiber strand. Its diagnostics (3LEDs/5 Functions) make its installation and
maintenance an absolute success. It is MA enable therefore can be remotely
controller by a managed and MA enabled device (S.CON1M/MA, F.CON8/16/MA,
F.CON12/MA/TL or MetroStar) The H.CON/MA series forms the basic CPE solution for
FTTx networks.
The
H.CON/MA is the industry’s first CPE for FTTx or corporate networks which is remotely managed and maintained eliminating the need of a costly SNMP agent and scarcely available IP addresses. It converts 100Base-FX signals from the Access node into 10/100Base-TX connected to the user, ensuring trouble free interconnection to any type of device or network. While designed as a simple and tamper-free device, a rich and comprehensive set of monitoring and control functions is available from any master unit (MA™ enabled) located in the Access node or network center.
ORDERING INFORMATION
Call 1-301-924-7400 ext. 17
|