UDS SW56 II Switched 56 DSU
The UDS Motorola SW56
II, combining a DSU and CSU in one unit, operates at all DDS line rates.
The front panel keypad simplifies dialing and operation.
Combines DSU and CSU in one unit
Operates on switched digital networks or on conventional DDS networks
operates at all DDS line rates - 2400 bps to 56 Kbps including 19.2 Kbps
Rate adapts DTE data rates at 56 Kbps
Choice of EIA-232D, V35, or EIA-530 data port interfaces
Automatic line equalization Convenient front panel LCD control
Keypad and function keys for easy operation Saves
operating configuration to nonvolatile memory Number directory holds ten
32-digit numbers with 16 character description Universal Data Shelf compatible
Description
Combining the functions of a Data Service Unit (DSU) and a Channel Service Unit
(CSU), the high-speed and versatile UDS Motorola SW56 II is designed to be used
on the ATT ACCUNET or US Sprint switched digital networks as well as
conventional digital networks. The SW56 II meets all specifications outlined in
Bell Publications 62310, 41458, and 41450.
With six status LEDs, a 32-character alphanumeric LCD, hexadecimal keypad, and
five function keys, the SW56 II is remarkably easy to operate. Operating
parameters are readily observed and changed through the LCD menus and function
keys.
The SW56 I I can operate over the full range of DDS line rates from 2400 bps to
56000 bps. When connected to a 56K bps digital line, the SW56 II can adapt DTE
data rates from 2400 to 19200 bps to the 56K line in either synchronous or
asynchronous format.
When operating over the ACCUNET or Sprint switched digital networks, the SW56 II
can accept dialing information from either the dialer port or the front panel.
All calls are originated using specified pulse-dialing techniques with call
progress information and echo-cancellation used on the Sprint network. Incoming
and call progress information can be monitored by speaker.
A receiver automatic line equalizer compensates for distortion and attenuation
caused by DDS line length.
The SW56 II has interchangeable DTE interface cards that allow a choice of
EIA232D, EIA-530, or V.35 interfaces with the DTE and should be specified when
ordered.
Test Functions
The SW56 II has a number of diagnostic tests available for troubleshooting
problems. To simplify operation, the LCD menu displays only the tests available
in the current configuration.
Remote loopback with test pattern
Local loopback with test pattern
Test pattern
Remote terminal loopback
Local loopback
Remote loopback
NOTE: WE
HAVE THE RS-550 Interface units IN STOCK
Communications Modems for RTU