![]() |
![]() |
The n920X2 provides a direct replacement for the n920BD. The powerful and robust Nano Series n920X2, with its small footprint and design flexibility, it can be integrated into any application. Operating in the 902 - 928 MHz ISM Band, the Nano Series n920X2 offers the reliability, features, and performance of our larger modems, yet can fit almost anywhere!
Frequency |
902 - 928 MHz |
Spreading Method |
Frequency Hopping / DTS |
Band Segments |
Selectable via Freq Restriction |
|
Hamming BCH Golay Reed-Solomon |
Forward Error Detection |
|
Error Detection |
32 bits of CRC, ARQ |
Encryption |
Optional (see –AES option) |
|
60+ miles (100+ km) |
Range |
|
Sensitivity |
-108 dBm @ 10-6 |
Output Power |
100mW - 1W (20-30dBm) |
Serial Interface |
TTL |
Serial Baud Rate |
300 bps to 230.4 kbps |
Link Rate |
19.2 kbps - 345 kbps (selectable) |
Operating Modes |
Point-to-Point, Point-to-Multipoint, Store & Forward Repeater, Peer-to-Peer |
|
|
Signals Interface |
RxD1, TxD1, RTS, CTS DCD, DSR, DTR, RxD2, TxD2, RSSI LEDs, Tx/Rx LEDs, Re- set, Config, Wake-up, RSmode |
|
|
Input IP3 (Antenna Connector) |
+12 dBm |
RF Selectivity Adjacent Channel Alternate Channel Out of Band |
60 dB 75 dB >90 dB |
Remote Diagnostics |
Battery Voltage, Temperature, RSSI, Packet Statistics |
Core Voltage OEM Enclosed |
3.3VDC Nominal (+/- 0.3V) 7-30VDC |
Power Consumption* (OEM: 3.3V +/- 0.3V)
* power consumption values +/- 10% |
AT Command: 80 mA Rx: 102mA Master Tx: 200mA Continuous Tx: 1.8 A |
|
|
|
|
Connectors: OEM Antenna Data Enclosed Antenna Data |
MMCX 60 Pin OEM Header
RP-SMA Female Bulkhead Female DB9 x2 |
|
|
Environmental |
-40oC - +85oC (All units are fully tested over the entire temperature Range) |
|
|
Weight OEM Enclosed |
Approx. 15 grams Approx. 210 grams |
Dimensions OEM
Enclosed |
Approx. 1.25” x 2.0” x .25” (32mm x 51mm x 6.35mm) Approx. 2.25” x 3.85” x 1.50” (57mm x 98mm x 38mm) |
|
|
Approvals |
FCC Industry Canada |
Part # | Description |
MHS113150 | OEM 900 MHz Spread Spectrum Wireless Modem |