|
Manufacturer |
Hewlett Packard |
Manufacturer Part Number |
J8130A#ABA |
Product Line |
ProCurve |
Product Name |
ProCurve 420 Wireless Access Point |
Marketing Information |
The Wireless Access Point 420 is a full-featured IEEE 802.11g, single-radio
access point ideally suited for medium to large wireless LAN deployments.
With integrated 802.3af Power over Ethernet, the HP ProCurve Wireless Access
Point 420 offers a cost-effective means to deploy either an 802.11b or
802.11g wireless network. The Access Point 420 addresses wireless security
concerns by delivering the latest security based on industry standards,
including support for IEEE 802.1X with per user/per session encryption,
Wi-Fi Protected Access, and multiple VLAN support. |
Manufacturer Website Address |
www.hp.com |
|
Device Type |
Wireless Access Point |
Processor Type & Speed |
1
x Motorola MPC8241 166MHz |
Memory |
4MB Flash Memory |
Ports |
1 x RJ-45 10/100Base-TX LAN
1 x DB-9 Console Management
|
Connectivity Media |
Twisted Pair |
Data Transfer Rate |
10Mbps Ethernet
100Mbps Fast Ethernet
|
Protocols Supported |
TCP/IP
TFTP
ICMP
ARP
SNTP
|
Security |
Local MAC address filtering
RADIUS MAC address authentication
64 VLANs
|
Expansion Slots Details |
Not Applicable |
Modules |
Not Applicable |
Controls |
Reset Switch |
Status LEDs |
100M device connected
Link activity
Power
|
Management |
HTTP interface for configuration and management
Telnet/CLI
SNMP agent
Web interface:
Microsoft Internet Explorer 5.5 or higher
|
Stackable |
Not Applicable |
|
Wireless Technology |
IEEE 802.11b/g |
Antenna |
2
Detachable with RP-SMA Connector |
Antenna Range |
1150 ft Outdoors Maximum |
Frequency Band/Bandwidth |
2.4GHz |
Access Method |
CSMA/CA |
Transmission Speed |
54Mbps |
Transmission Speed Details |
1Mbps Auto-fallback IEEE 802.11b
2Mbps Auto-fallback IEEE 802.11b
5.5Mbps Auto-fallback IEEE 802.11b
6Mbps Auto-fallback IEEE 802.11g
9Mbps Auto-fallback IEEE 802.11g
11Mbps Auto-fallback IEEE 802.11b
12Mbps Auto-fallback IEEE 802.11g
18Mbps Auto-fallback IEEE 802.11g
24Mbps Auto-fallback IEEE 802.11g
36Mbps Auto-fallback IEEE 802.11g
48Mbps Auto-fallback IEEE 802.11g
54Mbps Auto-fallback IEEE 802.11g
|
Transmit Power |
15
dBm Maximum |
Receiver Sensitivity |
-75 dBm - 36Mbps
-73 dBm - 48Mbps
-70 dBm - 54Mbps
-93 dBm - 1Mbps
-90 dBm - 2Mbps
-90 dBm - 5.5Mbps
-87 dBm - 6Mbps
-85 dBm - 9Mbps
-87 dBm - 11Mbps
-85 dBm - 12Mbps
-82 dBm - 18Mbps
-80 dBm - 24Mbps
|
Wireless Security |
802.1X support for MD5, TLS, TTLS, and PEAP
Dynamic per user/per session encryption keys
Wi-Fi Protected Access (WPA)
64, 128, and 152-bit WEP encryption
Local wireless bridge filter
|
Modulation |
IEEE 802.11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
IEEE 802.11g Orthogonal Frequency Division Modulation (64 QAM, 16 QAM,
QPSK, BPSK)
|
|
Input Voltage |
100 to 240V AC |
Input Current |
0.4A |
Frequency |
50
or 60Hz |
Power Consumption |
30W |
Power Supply |
External |
|
Temperature |
32 to 104°F (0 to 40°C) Operating
-40 to 158°F (-40 to 70°C) Storage
|
Humidity |
15 to 95% Non-condensing Relative Humidity Operating
90% Non-condensing Relative Humidity Storage
|
Thermal Dissipation |
102 BTU/h Maximum |
|
Additional Information |
Relative humidity (Non-Operating/Storage): 90% 149º F (65º C),
non-condensing
Reverse ARP
Plenum Rating
Closed system
DHCP client
Roaming
Selectable long or short preamble
Selectable beacon interval
Selectable DTIM interval
Selectable RTC/CTS
Selectable fragmentation threshold
Adjustable power output
Auto channel selection
|
Bill of Materials |
HP ProCurve 420 Wireless Access Point
Wall mount bracket and related hardware
|
Certifications & Standards |
IEEE 802.3
IEEE 802.3u
IEEE 802.11g
IEEE 802.11b
Radio compliance:
FCC Part 15 C
IC RSS 210
EN 300-328-1
EN 300-328-2
EN 301-489-1
EN 301-489-17
EU 1999/519/EC
ARIB STD-T66
Emissions:
VCCI, Class B
CISPR 22 Class B
EN 55022, Class B
AS/NZS 3548, Class B
FCC CFR 47 Part 15, Class B
BSMI CNS13438, Class B
RRL, Class B
Immunity:
Generic: CISPR 24
EN 55024
ESD: IEC 61000-4-2, 4 kV CD, 8 kV AD
Radiated: IEC 61000-4-3, 3V/m
EFT/Burst: IEC 61000-4-4, 1.0 kV power line, 0.5 kV signal line
Surge: IEC 61000-4-5, 1 kV/2 kV AC
Conducted: IEC 61000-4-6, 3V
Voltage dips and interruptions:
- IEC 61000-4-11
- Harmonics: IEC 61000-3-2
- Flicker: IEC 61000-3-3
Standards and protocols:
- RFC 783: TFTP
- RFC 854: Telnet
- RFC 768: UDP
- RFC 792: ICMP
- RFC 793: TCP
- RFC 826: ARP
- RFC 2030: SNTP
- RFC 2138: RADIUS
- IEEE 802.1X: Network Login
- IEEE 802.1Q: VLAN
- 802.3af: Power over Ethernet
- SNMPv1/v2
- HTML and telnet management
- RFC 1213: MIB II
- RFC 3164: Syslog
- IAPP (draft standard)
|
|
Form Factor |
Wall-mountable |
Dimensions |
1.29" Height x 8.59" Width x 5.41" Depth |
Shipping Dimensions |
3.25" Height x 9.19" Width x 13" Depth |
Weight |
2.27 lb - including mounting brackets |
Shipping Weight |
4.3 lb |
|
Standard Warranty |
Lifetime |
Additional Warranty Information |
For as long as you own the product, with next-business-day advance
replacement
|