GarrettCom 10Mb H50 H40A H80A H90A
Personal Hubs
Call us for Pre-sales and discount pricing
on
GarrettCom 10Mb H50 H40A H80A H90A Personal
Hubs
301-924-7400
Support
GarrettCom 10Mb H50 H40A H80A H90A Personal Hubs
Features
• Expands the number of
10Mb RJ-45 ports in a
multi-system office
• Acts as a miniature fullfunction
Ethernet hub
with four to nine 10BASET
ports, one of which is
an up-link port with an on/
off switch
• Supports any combination
of PCs, Macs, UNIX workstations,
portables, servers,
networked printers,
and other devices
• Is compatible with all networking
software environments
• Has a durable metal enclosure,
external power
supply for either 115 or
230 volt environments
Description
Magnum Personal Hubs® are an inexpensive solution for users
that need an easy-to-install 10Mb Ethernet network for a small office, lab,
conference room, trade show, sales demo, or home computer installation.
Personal Hubs are full-function repeaters that can operate as stand-alone hubs,
providing networking services for four to nine devices. Personal Hubs can also
expand local 10BASE-T Ethernet connectivity for existing personal workspaces and
offices. An up-link port can connect the Personal Hub to a central network using
an existing RJ-45 outlet, providing four to eight twisted-pair ports to support
additional PCs, workstations, and other networked devices.
Even networking novices can expand their network access from one to multiple
ports in only a few minutes, without modification to building wiring. They
simply plug their existing networked office device into one of the Personal
Hub’s front ports. The Personal Hub’s up-link port connects to the existing
network outlet.
The additional Personal Hub ports are available for expansion devices. When the
up-link port is off, the full 10 Mbps Ethernet capacity of the Personal Hub is
available for network activity within the personal workspace or local office. A
Personal Hub is easy to set up and monitor. The LED indicators show at a glance
whether the Hub and all attached segments are operating properly. Smaller than a
paperback book, a Personal Hub can be located on a desktop or Velcro®-mounted
vertically on an office wall or the side of a desk or cabinet.
The external power supply plugs into a nearby AC wall socket or power strip.
Personal Hubs are compatible with all networking software environments and
support full-length twisted-pair segment distances. The Magnum 10Mb Personal
Hubs and all Magnum products are designed and manufactured in the USA and are
backed by a three-year warranty.
Specifications
PERFORMANCE:
Data Rate: 10 Mbits / second
RPM Partitioning: Enforced after 32 consecutive collisions
RPM Reconnect: Occurs after 512 bits of error-free transmission
MAXIMUM STANDARD ETHERNET LENGTHS: DTE (AUI drop cable): 50m
10BASE-T (twisted pair): 100m
10BASE2 ThinNet: 185m
10BASE5 ThickNet: 500m
10BASE-FL Multi-mode Fiber Optic 2.0km
Single-mode Fiber Optic 10.0 km
NETWORK STANDARDS:
Ethernet V1.0/V2.0, IEEE 802.3; 10BASE-T, 10BASE2, 10BASE5, DTE, 10BASE-FL
OPERATING ENVIRONMENT:
Ambient Temperature: 32° to 120°F (0° to 50°C)
Storage: -20°C to 60° C
Ambient relative humidity: 5% to 95% (non-condensing)
POWER SUPPLY (EXTERNAL):
Power Input Voltage: 95-125 vac at 60 Hz for “-d” Models, 200 -
250 vac at 50 Hz for “-i” Models that have IEC power cable connection.
Power Consumption: H50 and H40A: 6 watts max., H90 and H80A:
10 watts max.
SWITCHES:
UP-LINK: MDI-X (Media Dependent Interface - Crossover) thumb operated
slide switch, converts one RJ-45 port from a regular (=
position) user segment port to a crossover (X position) up-link port
for on/off connection to a central hub or another cascaded hub.
LED INDICATORS: PWR: Steady on when power applied
RX (Per Port): Blinks when there is activity on the port
LINK (Per Port): Steady on when there is proper connection on
both ends of the cable segment
CONNECTORS
H50: Four front and one rear RJ-45, female shielded type
H40A: Four front RJ-45s, female shielded type, one rear AUI
H90: Eight front and one rear RJ-45s, female shielded type
H80A: Eight front RJ-45s, female shielded type, one rear AUI
Shielded 10BASE-T connectors accept either unshielded or
shielded wiring plugs for standard twisted-pair media wiring.
The regular RJ-45 ports support the standard for hubs-tousers
twisted-pair wiring: pin 1 = receive+, 2 = receive-, 3
= transmit+, 6 = transmit-, other pins not used. The
switched RJ-45 port is normally the same, but when switched
it supports the standard. for up-links using twisted pair
wiring, i.e., the transmit and the receive pairs are exchanged:
pin 1 = transmit+, 2 = transmit-, 3 = receive+, 6
= receive-, other pins not used.
MECHANICAL:
Enclosure: High-strength steel, suitable for vertical or horizontal
mounting
Dimensions:
H40A: 4.4 in x 2.9 in x 0.75 in
(11.0 cm x 7.4 cm x 1.9 cm)
H50: 4.8 in x 3.3 in x 0.75 in
(12.2 cm x 8.4 cm x 1.9 cm)
H80A and H90: 4.4 in x 5.0 in x 0.75 in
(11.2 cm x 12.7 cm x 1.9 cm)
Weight:
H50 and H40A: 13 oz (370 gr)
H90 and H80A: 1.0 lb (455 gr)
Power Supply: 1.0 lbs (455 gr)
Cooling method: Convection
AGENCY APPROVALS:
115v 60 Hz Power Supply is UL Listed, CSA Certified.
230v 50 Hz Power Supply is same, also GS approved
Emissions: Meets FCC Part 15 Class A and B, VDE Class B
WARRANTY:
Three years Made in USA
- Purchase orders accepted on GarrettCom, Inc. equipment
- Contract Buying and Volume Discounts available !!
- Please contact us 301-924-7400