GarrettCom 8000X
16 port Hub
Call us for Pre-sales and discount pricing
on
Garrett Magnum 8000X
301-924-7400
Support
GarrettCom 8000X
Features
• Provides sixteen ports per
hub, with configurable port
connectors for mixed-media
and mixed-speed flexibility
• Supports all fiber port
types, each port 10Mb or
100Mb, for up to 16 economical
fiber ports.
• Combines 10/100 speed
and media flexibility with stackability for rack-mount
expansion
• Complies with 100BASE-T,
10BASE-T and fiber
Ethernet standards; full
100Mb Class II+ repeater
functionality
• Has a compact package for
installation in offices and
labs, with metal case and
auto-ranging internal
power supply
• Options include -48VDC,
24VDC, and 125VDC power
supply, dual source power
input, 19” RETMA, ETSI, and 23” Telco rack mounting
Description
Magnum 8000X Mixed-Media Fiber Dual-Speed Stackable Hubs
provide the flexibility of configurable fiber and RJ-45 ports, of 100Mb or 10Mb
Ethernet speed per-port, all in one hub with the expandability of stacking. Any
mix of speeds and RJ-45 or fiber port types, up to 16 ports per hub, are
accommodated in a 1U rack-mount package.
Port modules may be factory configured or may be changed or added in the field.
Medium-sized “fiber-to-the-desktop” and industrial control networks that need to
mix new ports at 100Mb performance with economical 10Mb ports for other nodes
can benefit from the dualspeed
10/100Mb Magnum 8000X Mixed-Media fiber hubs.
Dual-speed network technology enables the Magnum 8000X
hubs to accept either 100Mb or 10 Mb signals, over fiber or copper
cables, configured on a per-port basis. Each fiber port can be
installed as either 10Mb or 100Mb speed, with the fiber connector
selected for ST, SC, FC, MTRJ, multi-mode or single-mode, FX or
SX standard, or other popular fiber port connector types. Each RJ-
45 port is independently auto-sensing for 10/100Mb speed, and
adapts to match the speed of the connected device.
The Magnum 8000X hubs support two shared traffic domains,
one at 100Mb and one at 10Mb, with an internal bridge or
switch interconnecting the two domains. Each port module is connected
into the appropriate 100Mb or 10Mb domain, depending
on its speed and type. As Magnum 8000X-A (or DS8016-A) stacked
units are added, the two traffic domains are expanded, up to the
three-units-high stacking capability of Magnum 8000s. Any combination
of 100Mb or 10Mb ports, fiber or copper, may be in use.
The 8000X Mixed-Media Fiber Dual-Speed Hubs and other
Magnum products are made in the USA and are backed by a three year warranty.
Specifications
PERFORMANCE:
Data Rate: 100 or 10Mbs, per port, individually selected. (The hub
supports two traffic domains, one at 100Mb and one at 10 Mb,
operating concurrently).
PDV(100M Path Delay Value): 80BT exceeds Class II specification
Partitioning: Enforced after 63 consecutive collisions
Auto-reconnect: Occurs after one packet of error-free reception
INTERNAL SWITCH or BRIDGE:
(One per stack to inter-connect the two traffic domains)
Processing type: Store and Forward
Address Table: 8K, self-learning, Packet buffers: 2MB, dynamic
Latency (w/o packet time): 100 to 10Mb or 10 to 100Mb: 5µs
NETWORK STANDARDS:
IEEE 802.3u: 100BASE-TX, -FX, IEEE 802.3: 10BASE-T
Auto-negotiation on TP, IEEE 802.3u
All 10Mb ports obey the rules for configuring 10Mb Ethernet
All 100Mb ports use Fast Ethernet rules
NETWORK CABLE CONNECTORS:
Modular on a per-port basis. Fiber ports at 100Mb and 10Mb.
Port modules for all fiber connector types, see “Ordering
Information” below.
RJ-45s are shielded female ports.
OPERATING ENVIRONMENT:
Ambient Temperature: 32° to 120°F (0° to 50°C)
Storage: -40°to 160°F (-40°to 70°C)
Ambient Relative Humidity: 5% - 95% (non-condensing)
Conformal coating (humidity protection) option: Request quote
STACKING CABLE:
A stacking cable with 25-pin “DB-25” male connectors, shielded,
8-in (20 cm) long, included with each 8000X-A. Stacks with
DS8016 Dual-Speed Hubs. Supports stacking up to 3 units high.
SWITCH PORT MODULES For Bonus Port Option: SPM-FDSC: 100Mb FDX Fiber SC multi-mode
SPM-FDST: 100Mb FDX Fiber ST multi-mode
SPM-FDSSC: 100Mb FDX Fiber SC single-mode
(available by RFQ only)
Note: 100Mb fiber segments attached to SPMs may be full fiber
distance. Conversely, 100Mb fiber segments attached to FPMs are
distance limited by collision domain considerations.
AC POWER SUPPLY (INTERNAL):
AC Power Connector: IEC-type, male recessed, rear of chassis
Power Input Voltage: 90 to 260 VAC (auto ranging)
Power Input Frequency: 47 to 63 Hz
Power Consumption: 30 watts typical, 65 watts max
DC POWER SUPPLY OPTIONS:
-48VDC: Input -36 to -70VDC
24VDC: Input 20 to 40VDC
125VDC: Input 90 to 150VDC
Std. Terminal Block: "-, GND, +",
Power Consumption: Same as AC
DC DUAL-SOURCE (OPTIONAL):
The Magnum 8000X may be ordered with optional Dual DC
power input, for continuity of operation when either one of the
DC input sources is interrupted. Available for -48VDC, 24VDC,
and 125VDC input types.
MECHANICAL:
Enclosure: Rugged sheet metal. Suitable for stand-alone or 1U
rack-mounting.
Rack-mounting brackets: 19” included; ETSI and 23” Telco
optional.
Dimensions: 1.75 in H x 17 in W x 10.5 in D
(4.4 cm x 43.2 cm x 26.7 cm)
Weight: 4.0 lb. (1.8 kg)
Cooling Method: Fan cooled, internal 9cfm
LED INDICATORS:
POWER: Steady on when power applied
BR: Steady on, unit has bridge inside
ACT 10: packet activity, 10Mb
ACT 100: packet activity, 100Mb
COL 10: Collision indicator, 10Mb
COL 100: Collision indicator, 100Mb
LED indicators per port, in each PM, are “L” for LINK, “A”
for Activity. RJ-45 PMs have an “S” for speed, where flashing
indicates auto-negotiation, steady ON indicates 100Mbps and
OFF indicates 10Mbps operation.
WARRANTY:
Three years Made in USA
- Purchase orders accepted on GarrettCom, Inc. equipment
- Contract Buying and Volume Discounts available !!
- Please contact us 301-924-7400