GarrettCom 4K8 Switch 8-Port
Call us for Pre-sales and discount pricing
on
Garrett Magnum 4K8 Switch, 8-port
301-924-7400
Support
GarrettCom 4K8 Switch, 8-port
Features
• Provides eight 10/100 RJ-45 ports plus an optional configurable 100Mb fiber
port
• All ports are switching and support full- and half-duplex; auto-negotiation on
TP ports
• High performance non-blocking operation, plug-and-play installation for
switching services, transparent to system software
• Has a compact 1U package for installation in rack cabinets, with metal case
and auto-ranging internal power supply
• Available options include -48VDC, 24VDC, and 125VDC power, dual-source, NEBS
and ETSI certification, “Reverse”
rack-mount, ETSI and 23” Telco brackets, Class B EMI, and extended temperature
range operation
Description
Magnum Model 4K8 Ethernet 10/100 Switches boost the
performance of Ethernet LANs, with the flexibility of both twisted-pair and a
bonus fiber port. The fiber port, an additional or 9th port, may be configured
from a variety of user-selected fiber connector and fiber cable types. The
twisted pair ports are 10/100 auto-negotiating. The “future-proof” fiber
port is normally 100Mb speed with factory
default setting to operate in full-duplex mode. 100Mb fiber connector types
available include multi-mode ST, SC, MV45 and MTRJ, and single mode 20km or
single-mode 40km “long reach” SC. Alternatively, for 10Mb fiber, a multi-mode
half-duplex ST-type port option is available. The optional fiber port is
normally configured and tested with the Magnum 4K8 unit in the factory, but may
be configured in the field. In common applications, groups of standard
dual-speed 10/100 hubs, 10Mb hubs, or 100Mb hubs and switches would form a
series of subnets for workgroups or multi-system power users. Each subnet would
be served by a separate switched port on a Magnum 4K-Series, and each of these
subnets would have full 100Mb or 10Mb bandwidth, operating in either half-or
full-duplex mode. Local traffic on one subnet, either 100Mb or 10Mb, is
switch-isolated from the other subnets for high overall network performance.
Magnum 4K8 Switches are easy to install and use. Addresses of attached nodes are
automatically learned and maintained, adapting the switching services to network
changes and expansions to provide plug and play operation. “Reverse” models with
front-mounted ports and LEDs, or with front-mounted LEDs, rear ports and power
connection, are available. The Magnum 4K-Series, with store-and-forward
switching, filter all faulty packets to minimize traffic congestion and are
non-blocking.
Magnum Model 4K8 Switches come in a convenient rack-mountable package; have a
rugged metal case and an auto-ranging power supply for operation with AC power
worldwide. “Carrier Class” and “Industrial Strength” models with optional DC
input power features are also available. The 4KSeries and all Magnum products
are made in the USA and are backed by a three-year warranty.
Specifications
PERFORMANCE:
Ports 1-8: 100 or 10Mb, full- or half-duplex mode per port, individually
determined. 10/100 auto-negotiating.
Internal jumper can select 100-only.
Port 9: Optional 100Mb Fiber Bonus Port: (multi-m or singlemode)
based on fiber connector part. FDX or HDX, default is FDX mode. (internal jumper
can select fdx-only). 10Mb fiber also available.
All Ports:
Processing type: Non-blocking, Store and Forward with
IEEE 802.3x full-duplex flow control
System aggregate forwarding rate: 1.2M pps (packets per second)
System (8p) aggregate filter rate: 1.2M pps for all ports
Address table: 16K nodes, self-learning, with address aging
Packet buffers: 1MB dynamic
Latency: 5µs + packet time max (TX - TX, TX - FX, FX - FX)
PDV: 50BT
NETWORK STANDARDS:
IEEE 802.3u: 100BASE-TX, -FX, IEEE 802.3: 10BASE-T
Auto-negotiation on TP, IEEE 802.3u
All 10Mb ports obey the rules for configuring 10Mb Ethernet
All 100Mb ports use Fast Ethernet rules
OPERATING ENVIRONMENT:
Ambient: 25° to 140°F (-5° to 60°C), optional extended range
Storage: -40°to 185°F (-40°to 85°C)
Ambient relative humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13000ft (-60 to 4000m)
Conformal coating (humidity protection) option: Request quote
UP-LINK, PORT #1:
Thumb-operated slide switch, converts Port #1 from a regular (= position) port
to a crossover (X position) Up-Link for on/off
connection to an upstream or cascaded hub or switch.
NETWORK CABLE CONNECTORS:
RJ-45 shielded female ports
100Mb: Category 5 UTP/STP 10Mb: Cat. 3,4, 5 UTP
Fiber ports: Zero, One or Two / unit.
Connector options: Multi-mode FX-ST, SC, MTRJ; Single-mode
20Km SC, and 40Km "long reach" single-mode SC.
AC POWER SUPPLY (INTERNAL):
AC Power Connector: IEC-type, male recessed, ON/OFF switch.
DC POWER SUPPLY OPTIONS:
-48VDC: Input -36 to -70VDC 24VDC: Input 20 to 40VDC 125VDC: Input 120 to 160VDC
Std. Terminal Block: "-, GND, +",
Power Consumption: Same as AC
DUAL POWER SOURCE (OPTIONAL):
The Magnum 4K8 may be ordered with optional Dual DC power input, for continuity
of operation when either one of the
DC input sources is interrupted. Available for -48VDC, 24VDC, and 125VDC input
types.
MECHANICAL:
Enclosure: Rugged high-strength sheet metal. Suitable for stand- alone or 1U
rack mounting.
Rack-mounting brackets: 19” included; ETSI and 23” Telco optional.
Cooling Method: Fan cooled, internal, on chip.
Dimensions: 1.75 in H x 17.0 in W x 9.0 in D, 4.45 cm H x 43.2 cm W x 22.9 cm D
Weight: 3.5 lb. (1.5kg)
SWITCHES ON CHASSIS, MANUAL:
Power ON/OFF, standard AC models
Full/half duplex on fiber ports.
LED INDICATORS ON CHASSIS:
POWER: Steady on when power applied
ERR: Self-test at power up failed.
Reverse Model Option Available: Reverse models are designed with the LED
indicators in the front and all wiring and power connections in the rear,
normally rack-mounted.
LED INDICATORS PER PORT:
Link/Act: Steady ON for LINK with no traffic, blinking indicates port is
transmitting and receiving
SPEED: ON=100, OFF=10Mb
F / H: Steady ON for Full duplex, OFF for Half duplex.
AGENCY APPROVALS:
UL Listed (UL1950), cUL, CE
Emissions meet FCC Part 15, Class B
Optional: ETSI and NEBS L3 Certified
WARRANTY: Three years Made in USA
Power Input Voltage: 100 - 240 VAC (auto ranging)
Power Input Frequency: 47 to 63 Hz
Power Consumption: 10 Watts typical, 14 Watts max with FPM
GarrettCom 4K8 Switch, 8-port Ordering
- Purchase orders accepted on GarrettCom, Inc. equipment
- Contract Buying and Volume Discounts available !!
- Please contact us 301-924-7400