New Fax Beta Software Release 4.0 offers all of the features/functionality of the T3460 Fast'R modem with the addition of fax support. The T3460 Fast'R modem supports Class 1 and Class 2.0 fax interfaces. Class 2.0 support is unique in that it can auto-detect incoming data (RAS) calls from fax calls! At-a-glance status shows modem performance. Provides configured and actual line rate and throughput. The modem daughter card has two LEDs on the rear panel. Adaptive Rate System (ARS) Automode, Autobaud Years of modem experience have produced one of the industry?s best algorithms for selecting the optimum modulation scheme, the highest DTE rates, and automatically falling forward and back data rates to ensure the highest error free data throughput Extensive security features Controls unauthorized access - freezes out hackers  Integral Circuit Quality Monitoring System (CQMS) Real time line statistics for pro-active network management V.54 diagnostic test suite Industry standard tests isolate any degradation in network performance ' Customer Support Service and support worldwide when you need it Compliance to Industry Standards Ensures interoperability and compatibility. Complies to Relevant Safety & Emissions Standards Available world wide. Flash Memory Easy upgrade of T3460 Fast'R software releases. Fast'RVu Windows based PC Application Software Simple and quick installation of central sites - in just minutes! Pull-down, menu driven GUI Interface for configuration, test and real time modem status and line quality of both local and remote modems saves valuable time and costly mistakes - anyone can easily set-up and monitor the T3460 Fast'R modems.  9000 UX or PC SNMP management Full management including extensive user programmable alarms on a wide variety of operational and performance parameters. Reports and statistics on faults and utilization, facilitates optimization of dial pool resources to maximize user satisfaction. Fast'R PLUS LCD Front Panel The 16-character display and four pushbuttons let you view and change configuration parameters. It also allows you to initiate tests and view status.

	Transmission Rates: 33.6, 31.2, 28.8, 26.4, 24.0, 21.6, 19.2,16.8, 14.4, 12.0, 9.6, 7.2, 3.8, 2.4, 1.2Kbps (+0.01% sync; +/-2.5% async). 300 bps in async only.
	Operating Modes V.34, V.32bis, V.32, V.23, V.22bis, V.22,V.21, Bell 212, Bell 103
	Calling Interfaces Hayes AT and ITU-T V.25 bis (synchronous only)
	Line Types 2-wire dial line or 2/4-wire leased line
	Error Correction & Data Compression V.42, LAP-M & MNP 4; V.42bis & MNP 5
	Transmitter Section Output level tolerance: +/- 1.0 Db Output level: country dependent Timing: Selectable internal, external, loopback
	Environment Operating temperature: +32? to 122?F (0? to 50?C) Storage temperature: -40? to 158?F (-40? to +70?C) Relative humidity: 0 to 95% non-condensing
	Certification Compliance/Approvals Safety: UL 1950, CSA 950, IEC 950, EN60950 Telecom: Country compliance as required, including FCC Part 68 (U.S.), IC-CS-03 (Canada), JATE EMC Compliance Standalone - FCC Part 15, Class B; CISPR 22 and EN 55022, Class B; AS 3548, Class B; EN 50082-1 Nest and Dual Modem Cards - FCC Part 15, Class A; CISPR 22 and EN 55022, Class A; AS 3548, Class A; EN 50082-1 CE marked for compliance to the EU LVD, EMC and TTE directive
	Physical AccessWay for T3460 Fast?R Size (H x W x D): 7"x 19"x10.5" (cm: 17.78 x 48.26 x 26.7) Power: 100/120/220/240 VAC nominal (switch-selectable), Frequency: 50/60 Hz or -48V DC nominal (redundant) T3460 Fast'R PLUS Standalone size (H x W x D): 1.75" x 6.75" x 9.6" (cm: 4.45 x 17.15 x 24.38) T3460 Fast?R Standalone size (H x W x D): 1.75" x 6.75" x 9.6" (cm: 4.45 x 17.15 x 24.38) T3460 Fast?R Nest Cards size (H x W x D): 0.9" x 6.75" x 9.6" (cm:2.29 x 17.15 x 24.38) T3460 Fast?R Vanguard Daughter Card size (H x W x D): 0.87" x 2.95" x 8.86" (cm:2.20 x 7.50 x 22.50)
	Power Requirements Standalone: 9V AC, 50/60 Hz, 800 mA Nest: 100/120/200/240V AC, 50/60 Hz, 1.2/1.0/0.6/0.5 A

TFast'R Vu is an easy-to-use Windows based application that helps you: View and set modem options without learning AT commands Check device, circuit, and signal status without special tools Copy configurations without leaving your keyboard Execute line and modem test without scopes and meters Upgrade modem software TFast'R Vu's Functions You may use TFast'R Vu to: Set options in stand-alone and card modems Copy and save configurationsInitiate and terminate dial calls Monitor modem and line status Initiate line and device tests Maintain your telephone book of stored numbers View real-time negotiated-connection data Download new modem software TFast'R Vu is especially useful for installations of multiple modems, but it is not required for modem setup and operation.

	TFast'R Vu requires a computer with the: Windows 3.1, Windows 95 or Windows NT operating system 486DX2 or Pentium-class processor11 MB of RAM 8-pin DIN to DB25F cable (product code 40384) to connect to a PC comm port CD-ROM drive if installing from CD included with 3460 AccessWay nest and 3460 Fast'R Stack Six stacking kit
	Platforms Supported by Fast'RVu3460 Fast'R Modem Familty: 326X Modem Family
	TFast'R Vu Release2.0 now supports the 326X platform. This will allow existing customers to take advantage of the ease of use that TFast'R Vu offers. Only features supported on the 3460 are supported on the 326X at this time, including configuration sets and gets, all forms of status gathering, testing, and miscellaneous modem commands. Non-supported features (those unique to the 3260 eg. restoral/SDC commands) can still be configured via the 326X front panel buttons/LCD display.