- G.SHDSL speeds to 2.3 (Model 3201)/4.6 Mbps (Model 3241)--Get
broadband single-pair connectivity with TC-PAM full-duplex symmetric
rates and distances exceeding 32,800 feet (9,754 meters)
- ATM, PPP, and Frame Relay--Versatile interface options enable simple
deployment into any network
- NAT/NAPT, Firewall, DHCP--Powerful routing features make shared
Internet connectivity simple and secure
- Interoperable with DSLAMs--Take advantage of Patton reliability
whether you connect back-to-back or to a third-party DSLAM.
- 10/100 Ethernet with MDI-X--Easily connect to any computer or
LAN—the built-in crossover switch eliminates messy configuration cables
- WWW/SNMP Manageable--Built-in VT-100 console port makes setup a
snap, and you can use the embedded HTTP/SNMP agent to manage the
DiamondLink G.SHDSL routers from anywhere in the world.
|
Combining standards-based ITU/ETSI G.SHDSL transmission with high speed IP
routing, the DiamondLink routers are perfect for bandwidth intensive
applications such as LAN-to-LAN networking, multimedia services, and
e-commerce transactions.
Based on the International Telecommunications Union (ITU) and European
Telecommunications Standardization Institute (ETSI) G.SHDSL G.991.2
standard, the Patton DiamondLink routers enable providers to extend their
reach-and-range by delivering rate-adaptive nx64 symmetrical speeds from
192 kbps to 4.6 Mbps—all over a single pair of wires.
The routers offer easy installation and turn-up. With G.hs support for
auto-line configuration and ATM, PPP, or Frame Relay, the routers offer
simple interfacing to any network. Its standard IP feature set provides
bridging and routing functionality along with advanced IP features like
NAT and Firewall, and optional IPSec-based VPN. Get point-and-click
control with the DiamondLink G.SHDSL router's built in HTTP/SNMP
management interfaces.
As part of Patton’s family of ipDSL products, the Model 3201 or Model 3241
offer a complete, managed, end-to-end system when used with Patton’s
central site ipDSLAM equipment. With these features the DiamondLink
G.SHDSL routers offer the clear and easy choice for mission-critical
networking.
The Model 3201 and Model 3241 G.SHDSL routers offer a standards-based DSL
that supports the fundamental and advanced access requirements needed in
the market today. These needs are:
- Provide a routed packet-based CPE with IP centric services and
functionality.
- Support compatibility with the ability to connect to standard DSLAMs
using G.SHDSL.
- Utilize the preferred management method for ISP/CLEC/Carrier
environments with the ability to manage devices from any workstation or
PC across the Internet.
|
DSL: G.991.2 ITU G.SHDSL Annex A and Annex B, G.994.1 G.hs. nx64
data rates over 2-wire full-duplex to 2.3 (3201)/4.6 (3241) Mbps,
symmetrical, TC-PAM encoding. Distance of 32,800 ft (9.9 km) at 192 kbps
to 18,000 ft (5.6 km) at 2.304 Mbps.
DSL Connection: Shielded RJ-11F isolation per IEC 950; RJ-45
available
Ethernet Connection: 10/100Base-T, Auto-Sensing, Full/Half-Duplex
operation; built-in MDI-X
Management: EIA-561 RJ-45 RS-232, VT-100 CLI, TELNET, Embedded
WEB/HTTP, SNMP, Logging or SMTP on events: POST, POST errors, line/DSL,
PPP/DHCP, IP MPOA AAL5 and Bridged encapsulation RFC 2684 and RFC 1577
IPoATM. LLC/VC Mux support.
ATM Support: UNI 3.0, 3.1, and 4.0 ATM QoS with UBR/CBR/nrt-VBR/rt-VBR
and per-VC queuing and shaping.
Peak cell rate shaping on a per-VCC basis up to 32 active VCCs
I.610 OAM network management including AIS/RDI, loop-back and performance
monitoring.
Protocol: Enhanced ILMI 4.0 for auto-configuration of ATM PVCs, IP
(RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826). IP
Router with RIP (RFC 1058), RIPv2 (RFC 2453), OSPF (RFC 2328) Integrated
DHCP Server (RFC 2131). Selectable IP leases and MAC/IP pairings. DHCP
relay agent (RFC 2132/RFC 1542) with 8 address pools. DNS Relay. IGMP v1
and v2. IP-in-IP (RFC-2003) encapsulation, Ethernet Bridging.
NAT/NAPT with integrated application support, MultiNat with 1:1 mapping,
Many:1, Many:Many mapping, NAT Port/IP redirection and mapping.
Security: DoS Detection/protection. Intrusion detection, Logging of
session, blocking and intrusion events and Real-Time alerts, Password
protected system management with a username/password for console and
virtual terminal, Packet filtering firewall for controlled access to and
from LAN/WAN. Support for 255 rules in 32 filter sets. 16 individual
connection profiles. Access list determining up to 5 hosts/networks which
are allowed to access management system SNMP/HTTP/TELNET
Indicators: 8 LEDs Power, DSL: Link, TX, RX, ENET: Link, 100M, TX
RX
Power Supply: External universal 90-260 VAC input or -48 VDC
Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC,
Low-Voltage Directive 73/23/EEC
Environment: Temperature: 32–122°F (0–50°C); Humidity: 5–90%,
non-condensing
Dimensions: 4.17W x 1.52Hx5.0L in. (10.6W x3.9H x12.7L cm) |