|
CANOGA PERKINS
PRODUCTS
|
|
| Canoga Perkins
offers a full range of fiber optic solutions for data communications
requirements. Product lines include fiber optic modems for a variety of
interfaces and data rates, multiplexers serving a wide range of speeds,
capacities and interfaces and LAN products that provide long distance LAN
extension up to 100km. Our video conferencing products offer video
extensions to meet requirements in a variety of environments. Canoga Perkins
specializes in fiber optic communications. The Company designs,
manufactures and sells LAN/WAN
Internetworking,
fiber optic modems
and multiplexers
(CWDM, WDM and TDM),
Videoconferencing products and Outside Plant Test equipment. Canoga Perkins
seeks to offer clients the most technologically
and functionally advanced transparent optical network systems available
for long distance fiber optic extension and low cost CWDM systems. Using
these systems, customers can increase their reliability, efficiency and
new application development. |
|
FIBER MODEM PRODUCTS
|
|
|
2240
Universal Modem For Sync, Async, G.703 compatible T1, E1 applications (up to
2.048Mbps), the 2240 offers over 15 interfaces, selectable clock rates
and pass-through controls.
2245 DS3 Modem The Model 2245 is a multi-featured DS3 fiber optic modem that
transmits standard DSX-3 (44.736 Mbps) signals over single mode or
multimode fiber optic cable. The 2245 DS3 fiber optic modem transports
any B3ZS coded data stream with either framed or unframed formats. It
provides complete diagnostic and fault isolation features when
transporting M13 or C-bit parity framed DSX-3 signals.
2262 T1/E1 Modem Provides a transparent fiber optic link extension for E1 or T1
signals, supporting AMI, B8ZS and HDB3. Offers alarm and remote
loopback indicators.
2270 High Speed Modem Featuring data through-put speeds up to 20 Mbps with selected
interfaces, the Model 2270 is ideal for modern cryptographic
environments and other applications requiring extremely high speeds.
2290 Multi-Featured Modem Suitable for most general purpose high-speed sync and async
applications. Typical applications include satellite downlinks,
microwave link extension and linking of high speed graphics devices.
2300 Series
Universal Fiber Optic Modems For all branches of the Military, Government agencies, commercial and
government system integrators, public and private network
administrators who need to extend standards based serial data over
fiber optic cable, Canoga Perkins 2300 Series Fiber Optic Modems
combine SNMP management with versatile and cost effective solutions
for all your commercial and C4I asset applications
2345
Fiber Optic modem for T3 and DS3 extensions
Suitable for most general purpose high-speed sync and async
applications. Typical applications include satellite downlinks,
microwave link extension and linking of high speed graphics devices.
2346 DS3 Modem This product is the solution that problem of the Telco Demark in the
wrong place or even the wrong building. When you need to tie
building communications together at the T3 - DS3 level the 2346 DS3
Fiber Optic modems will let you extend out to 100KM.
2361 EdgeAccess T1 Fiber Optic Modem
(Managed) The Model 2361 is a G.703 compliant EdgeAccess T1 fiber optic modem.
It is a microprocessor-based modem and supports the standard speed of
1.544Mbps. It provides a transparent fiber optic link extension for
AMI and B8ZS bipolar line codes.
2461 EdgeAccess E1 Fiber Optic Modem
(Managed) The Model 2461 is a G.703 compliant EdgeAccess E1 fiber optic modem.
It is a microprocessor-based modem and supports the standard speed of
2.048Mbps. It provides a transparent fiber optic link extension for
AMI and HDB3 bipolar line codes.
|
|
HARDENED MEDIA CONVERTERS AND SWITCH |
|
|
|
Canoga Perkins H101
Hardened 10 Mbps Ethernet Media Converter The model H101 Hardened 10
Mbps Ethernet BNC to Copper Media Converter is industrial strength all
the way. |
|
|
|
Canoga Perkins HF101
Hardened 10 Mbps Ethernet Copper to Fiber Media Converter The model
HF101 Hardened 10 Mbps Ethernet Copper Media Converter is designed to
provide reliable, trouble free operation in harsh industrial and outdoor
applications environments. |
|
|
|
Canoga Perkins
HF1001
Hardened 100 Mbps Ethernet Copper to Fiber Media Converter Convert
and transmit data between 100BaseTX shielded twisted pair (STP) and
100BaseFX fiber optic cables for media flexibility in new or expanding
100 Mbps Ethernet networks |
|
|
|
Canoga Perkins
HS8000
Hardened 10/100 Mbps Eight Port Ethernet Switch Hardened SNMP
Managed Eight Port 10/100 Mbps Ethernet Switch with six 10/100 Mbps
Switched Copper Ports and Two 100 Mbps Fiber Uplinks |
|
|
|
FIBER OPTIC
LAN / SAN EXTENDERS |
|
|
|
Canoga Perkins L311
The Model L311 is a managed UTP-to-Fiber
Media Converter that extends 10BASE-T UTP segments with fiber optic
cable. The L311 extends the interconnection between switches or
stations up to 100km. |
|
|
|
Canoga Perkins L312 The
L312 is a managed UTP to Fiber Ethernet Media Converter. It extends
10BASE-T UTP segments up to 120km over Single Mode fiber. It is
designed for installation into Canoga Perkins carrier class UCS
platform, and is also available as a standalone for desktop or wall
mount installations. |
|
|
|
Canoga Perkins L321
The L321 is a managed UTP-to-Fiber
Media Converter that extends 100BASE-T UTP segments with fiber optic
cable. The L321 extends the interconnection between switches or
stations up to 120km. |
|
|
|
Canoga Perkins L322
The L322 is a managed UTP to Fiber Fast Ethernet Media
Converter. It extends 100BASE-T UTP segments up to 120km over Single
Mode fiber. It is designed for installation into Canoga Perkins
Carrier Class UCS chassis, and is also available as a standalone for
desktop or wall mount installations.
|
|
Canoga Perkins L351
The L351 10/100BaseT Ethernet Service Unit (ESU) provides an
ideal choice for Service Providers delivering Ethernet Transparent LAN
Service (TLS) LAN extension services and helps support QoS
implementations. The L351 provides the longest distance extension of
any product in its class at 120 km and is NEBS Level 3 Tested and
Certified |
|
|
|
Canoga Perkins 8829
The 8829 FDX 10BASE-T UTP to Fiber
Media Converter - Provides UTP to fiber optic media conversion
enabling interconnection of switches or stations over 100 km apart in
FDX mode, or 3 km in HDX mode. |
|
|
|
Canoga Perkins 8835
The
8835 Fiber Optic Repeater - Provides cost effective 3 port Ethernet
LAN Repeater that is used to terminate fiber optic LANs from a remote
Network Node while providing the appropriate media interface to the
customer equipment. |
|
|
|
Canoga Perkins
9101
19"
Rack Mount Chassis - Designed to house a mix of up to twelve 10Mbps or
100Mbps transceivers, media converters, or passive WDM modules.
110VAC or -48v power supplies with optional redundancy. |
|
|
|
Canoga Perkins 9103
The 9103 is a cost-effective, compact, -48VDC rack mountable solution
that converts signals from 100BASETX to 100BASE-FX and is transparent
to half and full duplex operation. The 9103 single or dual Media
Converter also supports connectivity of up to 120km over single mode
fiber optic cable in full duplex mode.
|
|
|
|
Canoga Perkins 9119
Fast Ethernet 100BASE-TX to 100BASE-FX Fiber Media Converter - It
provides transparent 100Mbps Full Duplex operation, and supports
connectivity of up to 3 km over multimode fiber, and over 100km on
single mode fiber optic cable. The 9119 will also transparently pass
IEEE 802.1q (1522byte) & Cisco™ ISL (1548byte) packets.
|
|
|
|
Canoga Perkins 9120
The
9120 is a Gigabit Ethernet Media Converter. It extends multimode
Gigabit segments up to 90km over single mode fiber. It is designed for
installation into the Canoga Perkins 9101 LAN Chassis and is also
available as a standalone for desktop or wall mount installation. |
|
|
|
Canoga Perkins 9125
The Model 9125 is a Fibre Channel
Extender. It extends multimode segments up to 90km over single mode
fiber. It is designed for installation into the Canoga Perkins Model
9101 LAN Chassis, and is available as a standalone for desktop or wall
mount installation. |
|
|
|
Canoga Perkins 9135 Two
Port EdgeAccess™ Switch - 100BASE-TX/FX Compliant Fast Ethernet device
that supports native 10Mbps, 100Mbps or 10/100Mbps Ethernet LAN
Extension Circuits to over 100km. The 9135 provides speed
(10Mbps/100Mbps), mode (HDX to FDX), optical (MM to SM), and
wavelength (1310nm to 1550nm) conversions, with or without SNMP
management. The 9135 will also transparently pass IEEE 802.1q
(1522byte) packets with the optional SNMP Management Module. |
|
|
|
Canoga Perkins
9135G
The
9135G Gigabit Two-port EdgeAccess™ Switch is a 1000BASE-LX compliant
Ethernet device that supports native Ethernet LAN Extension circuits.
It is designed to provide a smooth transition through its
hot-swappable fiber optic interfaces. The primary application of the
9135G two-port Gigabit Switch is as a demarcation device, terminating
one-Gigabit fiber optic LAN Extension circuits at the customer
premises with SNMP management and a choice of customer interfaces.
|
|
Canoga Perkins
9135E The 9135E
Two-port EdgeAccess® Switch is an IEEE compliant Ethernet termination
device ideal for terminating 10M, 100M, and Gigabit Ethernet LAN
Extension circuits. It is designed to provide a smooth transition from
10Mbps to 100Mbps or 1000Mbps through hot swappable interfaces.
The primary application of the 9135E is to terminate 10Mbps, 100Mbps
or 1000Mbps LAN Extension services at the customer premises with SNMP
management and a choice of customer interfaces. |
|
|
|
FIBER OPTIC
MULTIPLEXERS |
|
|
|
Canoga Perkins 3240M
The 3240M Fiber Optic Multiplexer is the most versatile
and dependable multiplexer on the market today. No other product of its
kind can compare with the 3240M for fault tolerance and reliability.
SNMP management allows the 3240M to maximize network uptime and control. |
|
|
|
Canoga Perkins
3240S
The 3240S extends G.703 compliant E1 and T1 circuits
over fiber in point-to-point configurations. Distances up to 90km can be
achieved utilizing extended distance optics, or the economical multimode
LED optics may be sufficient for shorter distance requirements. |
|
|
|
Canoga Perkins
CMX-808
Model CMX-808 is
designed for EIA-232 asynchronous applications, it is an extremely
cost-effective fiber optic multiplexer. It provides for eight channels
of operation. These channel capacities can also be doubled when used
without control leads and with "Y" cables. Supported asynchronous speeds
are up to 19.2kbpsThe Model 3240S is a managed E1/T1 Fiber Optic
Multiplexer designed for maximum network uptime and control. |
|
|
|
Canoga Perkins CMX-320 Model
CMX-320 is designed for EIA-232 asynchronous applications and is
extremely cost-effective fiber optic multiplexer. It can be configured
for 16 or 32 channels. These channel capacities can also be doubled
when used without control leads and with "Y" cables. Supports
asynchronous speeds of up to 19.2kbps |
|
|
|
FIBER OPTIC MEDIA
CONVERTERS |
|
|
|
Canoga Perkins L332
The L332 is a managed Gigabit Ethernet Media Converter. It extends
Multimode Gigabit segments up to 110km over single mode fiber. It is
designed for installation into the Canoga Perkins carrier class UCS
platform, and is also available as standalone for desktop or
wall-mount installations.
Canoga Perkins L342
The L342 is a managed Gigabit Fiber Channel Extender. It extends
Multimode Fiber Channel up to 110km over single mode fiber. It is
designed for installation into the Canoga Perkins carrier class UCS
platform, and is also available as standalone for desktop or
wall-mount installations. |
|
| |
|
Canoga Perkins HF1001
The model HF1001 Hardened 100 Mbps Ethernet Copper to Fiber Media
Converter is designed to provide reliable, trouble free operation in harsh
industrial and outdoor applications environments.
|
| |
|
CWDM /
WDM |
| |
|
Canoga Perkins 6000 Series
2, 3 and 4 Channel CWDM
To maximize the existing fiber
plant, Canoga Perkins offers Coarse Wavelength Division Multiplexer (CWDM)
products designed to cost-effectively increase channel counts from two to
four using the same fiber composite. Models 6002/3/4 are widely-spaced WDM
modules for two to four channels, respectively. |
| |
|
Canoga Perkins 6000 Series
4
and 8 Channel CWDM's. Model 6004 and 6008 Passive CWDM modules work
in conjunction with Canoga Perkins’ CWDM transponder line to deliver
carrier class performance at a fraction of the cost of expensive DWDM
systems. Each port is capable of receiving discrete CWDM wavelengths from
1470nm to 1610nm, with optional 1310nm pass through channel, and optically
multiplexing the wavelengths into one composite. |
| |
|
Canoga Perkins 6100 Access
Module
The 6100 is a host module, which can
accommodate one or two converter / transponder modules. Available as a
standalone enclosure or as a module in the UCS. This card provides the
power, management, and alarming for the individual converter modules that
are installed within. |
| |
|
Canoga Perkins 6150 FibreXpander
4-Channel CWDM System Expand the capacity of your
existing fiber by installing Canoga Perkins’ innovative FibreXpander
instead of laying more fiber. The FibreXpander allows the user to extend
up to four applications over one pair of single mode fiber, quadrupling
your capacity instantly. |
| |
|
Canoga Perkins 6600 Fiber Savers Fiber
Singlers offer a cost-effective solution for connecting two 1310nm devices
over an individual single mode fiber. This doubles the available fiber
currently in place or fiber planned for future expansion. The 6600 Series
Fiber Saver is specifically designed for Enterprise environments with Star
Configurations requiring point-to-point single fiber transmission. The
Fiber Saver is available in 8 or 16 single fiber interfaces in rackmount
configuration. |
| |
|
Canoga Perkins 6702 CWDM
Transponder Expand
the capacity of your existing fiber by installing Canoga Perkins’
innovative 6702 Series CWDM Transponder instead of laying more fiber. The
6702 Series CWDM Transponder allows the user to extend up to nine
applications over one pair of single mode fiber using WDM technology. |
| |
|
Canoga Perkins 6703 CWDM
Transponder
Expand
the capacity of your existing fiber by installing Canoga Perkins’
innovative 6703 Series CWDM Transponder instead of laying more fiber. The
6703 Series CWDM Transponder allows the user to extend up to nine
applications over one pair of single mode fiber using WDM technology. |
| |
|
Canoga Perkins L600 Series Fiber Optic
Transponder
Optical
converter/transponder line interface module (TLIM) for use in a 6100 host
module. The L60x TLIM is an unidirectional converter of multimode to
single mode, short reach to long reach optics, and/or one wavelength to
another. A standard converter may take a 1310nm multimode input and
convert it to a 1550nm single mode signal for transmission over 100km.
Wavelengths can be ordered to match those required for the 6002/3/4
passive WDM modules. Speeds from 8Mbps to 1.25Gbps are accommodated. Clock
recovery or bandwidth monitoring options are available. |
| |
|
Canoga Perkins L650 Series / 6001 Fiber Singlers
Fiber Singlers offer a cost-effective solution for
connecting two 1310nm devices over an individual single mode fiber. This,
in effect, doubles the available fiber currently in place or fiber planned
for future expansion. The L650 Series is an 8Mbps to 1.25Gbps protocol
transparent transponder with an integral WDM element, which combines the
transmit and receive optical paths onto a single fiber. A passive
Fiber Singler 6001 can be used at the remote end when the end equipment
supports a loss budget adequate for the attenuation link. Single and dual
stage versions of the 6001 are available that provide cross-talk isolation
values greater than 30dB. |
| |
|
Canoga Perkins OADM Drop and Continue or Drop and Insert Multiplexer
To maximize fiber efficiency, Canoga Perkins introduces the passive OADM,
Optical Add/Drop Multiplexer, product line. Canoga Perkins offers
two types of OADMs: Drop and Continue or Drop and Insert. The passive OADM
module allows users to drop a specific optical wavelength at any point in
the application or insert another wavelength to the link. This can be done
on one pair of singlemode fiber instead of multiple pairs. |
| |
|
Canoga Perkins WA-2
Model WA-2 is a bi-directional
two channel WDM. This passive device effectively combines 1310nm and
1550nm (SMF only) or 850nm and 1310nm (MMF only) wavelength data signals
together over a composite fiber pair. It is totally speed, protocol, and
line code independent; even analog and digital signals can transverse in
parallel. |
| |
|
UNIVERSAL
CHASSIS SYSTEM |
| |
|
Canoga Perkins
UCS 1000
The 5U UCS 1000 offers multiple fiber
optic based services up to Gigabit speeds. The UCS 1000 provides a NEBS
Level 3 tested and certified, cost effective managed platform. Different
technologies can be mixed to form any type of network that you require. A
variety of technology modules with various interface options provide
complete flexibility. Everything is hot swappable and redundancy is
offered to provide a trouble-free, rock solid product you can count on. Up
to 15 technology modules can be housed in one UCS 1000. A 19" or 23"
rackmount can be used with front mount, mid mount, rear mount or recessed
mount. Advanced monitoring, management, trouble shooting and configuration
features of all the UCS 1000 products provide you full access to the
system locally and remotely. |
| |
|
Canoga Perkins
UCS 1001 The UCS 1001 is a general-purpose 1U,
two slot chassis. Technology modules that are used in the UCS 1000 fit in
the UCS 1001. Flexible and scalable, the UCS 1001 accommodates the entire
Canoga Perkins’ Universal Chassis System product line. It is ideal for
customer premises installation, enterprise networks and military
installations. A 19" or 23" rackmount can be used with front mount, mid
mount, rear mount or recessed mount. |
| |
|
Canoga Perkins UCS
1002 The
EdgeAccess Universal Chassis System (UCS) Model 1002 is a managed 2U
carrier-class multi-technology platform designed to accommodate the Canoga
Perkins new generation of LAN Extension products with other technology
modules planned. The UCS 1002 is NEBS Level 3 tested and certified,
ensuring a robust and fault-tolerant platform. Up to 14 technology modules
can be housed in one UCS 1002. Up to eight UCS 1002’s can be controlled by
a single IP address. |
| |
|
Canoga Perkins
UCS 1020 The EdgeAccess 1020 is a one-slot
enclosure designed to provide management access to any Canoga Perkins
fully manageable 2U module. An EIA 232 port provides terminal or modem
access and an RJ45 connector provides 10BaseT access to the installed
module. Network operators can gain management information via
Telnet, SLIP/PPP, VT100 terminal access, or modem. Switches for connector
configuration, local and remote loopback and LEDs are located in the front
for easy access. The EdgeAccess 1020 is available with AC power and comes
with wall mount brackets |
| |
|
Canoga Perkins
UCS 1030E The
EdgeAccess 1030E is a cost effective alternative to the UCS 1020 listed
above for applications that do not require local management access. It
holds one fully manageable or limited management 2U module. The 1030E is
available with AC power and comes with wall mount brackets. |
| |
|
Canoga Perkins
UCS 1040
The EdgeAccess® 1040 is a
one-slot enclosure designed to provide management access to any Canoga
Perkins fully manageable 5U module. An RJ45 connector provides 10BaseT
access to the installed module so network operators can gain vital
management information via Telnet, SNMP or CanogaView®. Switches for
connector configuration, local and remote loopback and LEDs are located in
the front for easy access. The EdgeAccess® 1040 is available with AC power
and comes with wallmount brackets. |
| |
|
Canoga Perkins
UCS 1050
The EdgeAccess®
1050 is a cost effective alternative for applications that do not require
local management access. It holds one fully manageable or limited
management 5U module. The 1050 is available with AC power, or non-powered
for WDM modules, and comes with wallmount brackets. |
|
|
|
Rack Mount Kit / RackMount Kit
This kit provides the necessary hardware to install two Canoga
Perkins’ UCS Standalone devices in a rack. |
|
|
|
ETHERNET
OVER FIBER |
|
|
Canoga Perkins Model N525
Ethernet Termination Service Unit (ETSU). The N525 ETSU permits
Ethernet traffic to be used over
fiber optic cable to extend its distance and enhance its security. |
|
|
|
OUTSIDE
PLANT (OSP) - TEST AND MEASUREMENT |
|
|
|
Canoga Perkins
Model 1401E Time Domain Reflectometer (TDR)
The Canoga Perkins Model 1401e Time Domain Reflectometer (TDR) will locate
and identify faults and problems in telephone cables and DSL lines. |
|
|
|
Canoga Perkins
Model P400 Cable Identification Kit
Cable Identification Kits enable OSP craftsmen to record cable number and
pair count information on the tags for future changes or new
installations. Each kit includes 100 tags, ties and a marking pen. |
|
|
|
Canoga Perkins Model
PR25A Conductor Tagger & Analyzer The
Model PR25A Conductor Tagger and Analyzer is a multifunction test set that
enables fast, accurate tagging of working and non-working lines, while
eliminating the risk of disturbance to the customer. |
|
|
|
Canoga Perkins
Model
PR80A Tunable Amplifier The
Model PR80A Tunable Amplifier is used to locate cable trouble and identify
pairs. Compatible with most popular tone generators, the PR80A enables
craftsmen to tune to the exact frequency of the tone sent, facilitating
tone identification |
|
|
|
VIDEO
CONFERENCING |
|
|
|
Canoga Perkins 3310 Video Conferencing Optical Multiplexer
The 3310 Mark II is a Video Conferencing Optical Extender (VCOE). It is
designed to extend the distance between endpoints of video conferencing
systems over fiber optic cable in a variety of applications |
|
|
|
Canoga Perkins 3260 DS-3 Video Multiplexer Designed for point-to-point video conferencing applications. The 2240-MC
features an extensive selection of interface options, including data and
dialer on one fiber pair |
|
|
|
DIGITAL
VIDEO EXTENDERS |
| |
|
Canoga Perkins 2240-MC
Designed for point-to-point video conferencing applications. The 2240-MC
features an extensive selection of interface options, including data and
dialer on one fiber pair |
| |
|
Canoga Perkins 3320 Canoga Perkins 3320 Series
of SDI Digital Video Extenders provides high performance extension of
SMPTE SDI Digital Video on standard multimode and single mode optical
fiber. |
Canoga Perkins Military Solutions
|
