 |
|
|
|
|
|
|
||
|
|
|
|
Verso / Verilink
WANsuite 7205 WANsuite 7205
The
WANsuite® 7205 is an intelligent access device. The 7205 can be used for private
leased line or Frame Relay networks for E1 or Fractional E1 connections. It is a
shelf-based card that fits into any AS2000 chassis. Ideal for wireless providers
implementing a network-based E991 Phase 2 solution or planning wireless network
overlay, each unit offers one network port, two drop and insert ports, two
serial data ports, and one Ethernet port. The card’s built-in mini-DACS makes
installation a snap whether running in a daisy-chain configuration or simply
splitting bandwidth between multiple wireless equipment. The 1RU footprint
allows for base station integration even in the tightest areas. The WANsuite
7205 offers a cost-effective solution that provides the flexibility needed to
support your TDM applications today and your packet needs of the future. The WANsuite 7205 gathers network statistics for Layer 1, Layer2, and Layer 3, auto discovers DLCIs, offers LMI sourcing to maintain the frame circuit in event of equipment failure, and provides the statistics needed to enforce Service Level Agreements. It also supports SNMPv.2 and remote management with a simple-to-use Web browser interface. Highlights
SPECIFICATIONS PART NUMBER(S) AND DESCRIPTION 1100040: WANsuite 7205 3 E1, 2DP, with Rear panel card 1100063: WANsuite 7205 Bundle: 3 E1, 2DP, 19/23" Dual line shelf, AC SERIAL INTERFACES DTE Port: Two software-selectable V.35, EIA-530, or RS-232 Data Rate: Nx56/64, where N = 1 to 32; Sync:1200, 2400, 4800, 9600, 19200, 56000, 64000 bps; Async: 300, 600, 1200, 2400, 4800 9600, 19200, 38400, 57600, 115200 bps Bundling: Contiguous, Alternating, and Random Protocol: TDM, Frame Relay Connection: DB-25 female Ethernet: 10/100 Base-T auto-sensing for IP routing and/or Management Protocol: TCP/IP, RIP1, RIP2, OSPF NETWORK INTERFACE (Three Network Ports) Line Rate: 2.048 Mbps (± 50 bps) Data Rate: Nx56/64 kbps to 2.048 Mbps, where N=1 to 32 DSOs Line Code: AMI or HDB3 Line Framing: CAS, CCS, or 2 Mbits unframed Protocol: TDM, Frame Relay Connection: BNC jack, 75 ohms ± 10%, RJ-48C jack, 120 ohms ± 10% Input Signal: E1, +1 to -27 dB Output Signal: 3.0 V base-peak into 75 or 120 ohms Line Protection: 1000 V protection, fused input and output per GR 1089 Ones Density: HDB3, alternate fill 2.048 kbps Interface: Per ITU-T G.823, G.703, G.704 MANAGEMENT INTERFACE Supervisory Connection: DB-9 female, VT100, Async PPP, PAP, CHAP, Async RS-232 Data Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps SNMP Connection: In-band via Ethernet or Network ports; using Web browser or Telnet; out-of-band via Supervisory port; dial-in via external modem DACS INDUSTRY LISTINGS FCC Compliance: Part 15 Subpart B, Class A, Part 68 US Safety: UL 1950 3rd Edition Canadian Safety: CSA C22.2 No. 950-95 Industry Canada: CS-03, Issue 8 BellCore: GR-1089-Core Part 3 DIAGNOSTICS Performance: Built-in reports sampled every sec, accumulated in 15-min increments with up to thirty 24-hr summaries Email notification Originate Ping Network Loops: Line, Payload, or Maintenance DTE Port Loops: V.54 and Local BERT: Marks, QRSS, 511, 2047, 215, and Spaces Test Jacks: Network In, Equipment Out, Equipment Monitor, Equipment In, Network Out, Network Monitor TIMING Network 1, Network 2, Network 3, Internal, Serial 1, Serial 2 POWER REQUIREMENTS Power Input: AC 100-240 V / DC 24-48 V redundant MECHANICAL Mounting: Desktop or Rack-mount in AS2000 Shelf Dimensions: 0.94 in. (2.39 cm) W, 8.2 in. (20.83 cm) H, 9.94 in. (25.25 cm) D Weight: 15.2 oz (430.91 g) Shelf Option: Dual-line, Quint-line, Multi-line ENVIRONMENTAL Operating Temperature: 0 to 50 ºC (32 to 122 ºF) Storage Temperature: -20 to 65 ºC (-4 to 149 ºF) Humidity: 95% maximum, non-condensing FRAME RELAY STATISTICS COLLECTED IN 96 15-MINUTE INTERVALS Tx/Rx frames and octets Tx/Rx mgmt frames and octets Rx frames with FECN, BECN Rx invalid frames Tx/Rx status inquiry frames Tx/Rx status response frames Rx invalid LMI frames Peak/Average throughput Rx frames with DE bit set Tx excess CIRand Be Verso / Verilink’S SERVICE AWARE™ TECHNOLOGY Layer 3 Statistics and Up: IP, PPP, TCP, UDP, FTP, TFTP, SNMP, RIP1, RIP2, BootP, SMTP, HTTP, ICMP, OSPF, L2TP, H.323 Peak and Average Throughput on Up to 10 User Definable Filters: DLCI, IP address, or IP port number Top talkers VERIFY SERVICE LEVEL AGREEMENTS (FRF.13) Frame delivery ratio Data delivery ratio Round trip delay Service availability in seconds WARRANTY AND SUPPORT Five-year warranty |
