Look to DCE for Verso / Verilink
Verso / Verilink
WANsuite 7105
Look to DCE
for Verso / Verilink
WANsuite 7105
The WANsuite® 7105 is an intelligent access device. The 7105 can be used for private leased line or Frame Relay networks for T1 or Fractional T1 connections. It is a shelf-based card that fits into any AS2000 chassis. Ideal for wireless providers implementing a network-based E991 Phase 2 solution or planning wireless network overlay, each unit offers one network port, two drop and insert ports, two serial data ports, and one Ethernet port. The card’s built-in mini-DACS makes installation a snap whether running in a daisy-chain configuration or simply splitting bandwidth between multiple wireless equipment. The 1RU footprint allows for base station integration even in the tightest areas. The WANsuite 7105 offers a cost-effective solution that provides the flexibility needed to support your TDM applications today and your packet needs of the future.
The WANsuite 7105 gathers network statistics for Layer 1, Layer 2, and Layer 3, auto discovers DLCIs, offers LMI sourcing to maintain the frame circuit in event of equipment failure, and provides the statistics needed to enforce Service Level Agreements. It also supports SNMPv.2 and remote management with a simple-to-use Web browser interface.
Highlights
SPECIFICATIONS
PART NUMBER(S) AND DESCRIPTION
1100039: WANsuite® 7105 3 T1, 2DP, with Rear panel card
1100062: WANsuite® 7105 Bundle: 3 T1, 2DP, 19/23"
Dual line shelf, AC
SERIAL INTERFACES
DTE Port: Two software-selectable V.35, EIA-530, or RS-232
Data Rate: Nx56/64, where N = 1 to 24;
Sync: 1200, 2400, 4800, 9600, 19200, 56000, 64000
bps; Async: 300, 600, 1200, 2400, 4800 9600, 19200, 38400, 57600, 115200 bps
Bundling: Contiguous, Alternating, and Random
Protocol: TDM, Frame Relay
Connection: DB-25 female
Ethernet: 10/100 Base-T auto-sensing for IP routing and/or
Management
Protocol: TCP/IP, RIP1, RIP2, OSPF
NETWORK INTERFACE
(Three Network Ports)
Line Rate: 1.544 Mbps (± 50 bps)
Data Rate: Nx56/64 kbps to 1.536 Mbps, where N=1 to 24 DS0s
Line Code: AMI or B8ZS
Line Framing: D4 or ESF
Protocol: TDM, Frame Relay
Connection: RJ-48C, 100 ohms ± 5%
Input Level: DS1, +1 to -27 dB (ALBO on Net2 and Net3)
Output Signal: 3.0 V
Mode: Long-haul (T1), short-haul (DSX)
DSX-1 Level: 0-110, 111-220, 221-330, 331-440, 441-550, 551-660, >661 ft
Line Build Out: 0, -7.5, -15, -22.5 dB
Line Protection: 1000 V protection, fused input and output per GR 1089
Jitter Control: per TR 624111 and T1.403
MANAGEMENT INTERFACE
Supervisory Connection: DB-9 female, VT100, Async PPP, PAP,
CHAP, Async RS-232
Data Rate: 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200 bps
SNMP Connection: In-band via Ethernet or Network ports; using Web-browser or Telnet; out-of-band via Supervisory
port; dial-in via external modem
INDUSTRY LISTINGS
FCC Compliance: Part 15 Subpart B, Class A, Part 68
US Safety: UL 1950 3rd Edition
Canadian Safety: CSA C22.2 No. 950-95
Industry Canada: CS-03, Issue 8
BellCore: GR-1089-Core Part 3
DIAGNOSTICS
Performance: Built-in reports sampled every sec, accumulated in 15-min increments with up to thirty 24-hr summaries
Email notification
Originate Ping
Network Loops: Line, Payload, or Maintenance
DTE Port Loops: V.54 and Local
BERT: Marks, QRSS, 511, 2047, 215, and Spaces
Test Jacks: Network In, Equipment Out, Equipment Monitor, Equipment In, Network Out, Network Monitor
TIMING
Network 1, Network 2, Network 3, Internal, Serial 1, Serial 2
POWER REQUIREMENTS
Power Input: AC 100-240 V / DC 24-48 V redundant
MECHANICAL
Mounting: Desktop or Rack-mount in AS2000 Shelf
Dimensions: 0.94 in. (2.39 cm) W, 8.2 in. (20.83 cm) H,
9.94 in. (25.25 cm) D
Weight: 15.2 oz (430.91 g)
Shelf Option: Dual-line, Quint-line, Multi-line
ENVIRONMENTAL
Operating Temperature: 0 to 50 ºC (32 to 122 ºF)
Storage Temperature: -20 to 65 ºC (-4 to 149 ºF)
Humidity: 95% maximum, non-condensing
FRAME RELAY STATISTICS COLLECTED IN 96
15-MINUTE INTERVALS
Tx/Rx frames and octets
Tx/Rx mgmt frames and octets
Rx frames with FECN, BECN
Rx invalid frames
Tx/Rx status inquiry frames
Tx/Rx status response frames
Rx invalid LMI frames
Peak/Average throughput
Rx frames with DE bit set
Tx excess CIRand Be
Verso / Verilink’S SERVICE AWARE™ TECHNOLOGY
Layer 3 Statistics and Up: IP, PPP, TCP, UDP, FTP, TFTP, SNMP,
RIP1, RIP2, BootP, SMTP, HTTP, ICMP, OSPF, L2TP, H.323
Peak and Average Throughput on Up to 10 User Definable
Filters: DLCI, IP address, or IP port number
Top talkers
VERIFY SERVICE LEVEL AGREEMENTS (FRF.13)
Frame delivery ratio
Data delivery ratio
Round trip delay
Service availability in seconds
WARRANTY AND SUPPORT
Five-year warranty