 |
|
|
|
|
|
|
||
|
|
|
|
Verso / Verilink
WANsuite 6430
WANsuite 6430 The WANsuite® 6430 WAN Access Device/IP Router utilize the G.shdsl (referred to as SHDSL) standard into the ATM access space. Each unit is equipped with a network port, a 10/100Base-T Ethernet interface, and a supervisory port. The WANsuite 6430 comes equipped with a serial port that can be used to connect the unit to an existing external router/bridge using PPP/HDLC protocol. The IP Gateway feature enables IP packet routing throughout the LAN/WAN network architecture using a static routing configuration or dynamic routing protocols, substantially reducing the need to purchase costly routers. Furthermore, the 6430 enables network managers to monitor end-to-end network performance, isolate performance problems, determine appropriate bandwidth needs, and monitor network trends to assist in future capacity planning initiatives and controlling expenses and costs. With Verso / Verilink’s innovative WANsight™ technology, remote Web-based access for all management diagnostics and reporting is simplified and cost-effective. Highlights
SPECIFICATIONS WANSUITE 6430 SHDSL WAN Access Device and Router User selectable V.35, X.21, RS-232 10/100 Ethernet, autosensing Management: EOC (standard commands), WANsight (Webbased interface), Local, VT100, SNMP, Telnet PART NUMBER(S) AND DESCRIPTION 1100034: WANsuite 6430 SERIAL INTERFACES DTE Port: Selectable V.35, X.21, RS-232 Data Rate: Synchronous, nx64 kbps (where n=1-36) Connection: DB-25 Female NETWORK INTERFACE Line Rate: 2.312 Mbps Line Framing: ATM Transport (G.991.2 E9) Line Coding: Trellis Coded Pulse Amplitude Modulation Network Protocol: ATM Adaptation Layer: AAL5 Encapsulation: RFC1483 - LLC MUX Encapsulation Mode: Routed IP, PPPoA Number of PVCs Supported: Up to 16 MANAGEMENT INTERFACE Embedded Operations Channel (EOC), WANsight (embedded Web server interface), VT100, Telnet, SNMP, local supervisory port INDUSTRY LISTINGS FCC: Part 15, Class A, Subpart B Safety: EN 60950 Canadian Safety: CSA C22.2 No. 950-95 DIAGNOSTICS Performance: 15 min, 24 hr, and 30 day monitoring (sampled every sec) Network Loop: SHDSL network loopback Span Performance Statistics: ES, SES, CRC, LOSS, UAS Originate Ping Email notification on trip event STATISTICS Per Protocol Tx/Rx frames Tx/Rx octets Rate peak Rate average Top talkers ATM Transmit and receive: cells, frames, errored frames, bytes Opened VCCs Unopened VCCs TIMING Internal, network POWER REQUIREMENTS Voltage Input: 100 to 240 VAC Frequency: 47 to 63 Hz Dissipation: 8 W Maximum (27.4 BTU/hr) MECHANICAL Mounting: Stand-alone Dimensions: 11.75 in. (29.845 cm) W, 1.86 in. (4.724 cm) H, 8.75 in. (22.225 cm) D Weight: 2.13 lb (0.97 kg) ENVIRONMENTAL Operating Temperature: 0 to 50 ºC (32 to 122 ºF) Storage Temperature: -20 to 65 ºC (-4 to 149 ºF) Humidity: 95% maximum, non-condensing WARRANTY AND SUPPORT Five-year warranty |
