Verso / Verilink
WANsuite 6230
Look to DCE
for Verso / Verilink
WANsuite 6230
The WANsuite® 6230 is an intelligent access device for use in E1 ATM data applications. The unit can serve as an enhanced CSU/DSU with a software-selectable data port and collect and report ATM performance statistics when used with an external router. The integral router/bridge software makes it an extremely cost-effective data solution for smaller remote office locations. The 6230 offers SNMPv.2 and remote management with a simple-to-use Web browser interface.
Highlights
SPECIFICATIONS
WANSUITE 6230
E1 WAN Access Device and Router
User selectable V.35, RS-232, EIA-530, X.21
10/100 Ethernet, autosensing
Management: WANsight (Web-based interface), Local,
VT100, SNMP, Telnet
PART NUMBER(S) AND DESCRIPTION
1100038: WANsuite 6230
SERIAL INTERFACES
DTE Port: Selectable V.35, RS-232, EIA-530, X.21
Data Rate: Synchronous, nx64 kbps (where n=1-32)
Connection: DB-25 Female
NETWORK INTERFACE
Line Rate: 2.048 Mbps
Line Framing: CAS, CCS, or 2 Mbits unframed
Line Coding: AMI or HDB3
Input Signal: E1, +1 to -27 dB
Connection: RJ-48C jack, 120 ohms (± 5%)
Output Signal: 3.0 V (± 10%) base-peak into
120 ohms with protection
Jitter Control: per G.823 Sections 2.1 and 3.0
Timing Source: Internal, network, serial (6230 only)
Ones Density: HDB3, alternate fill; complies with G.701 and
G.703
Network Protocol: ATM
Adaptation Layer: AAL5
Encapsulation: RFC1483 - LLC MUX
Encapsulation Mode: Routed IP, PPPoA
Number of PVCs Supported: Up to 16
Legend
MANAGEMENT INTERFACE
WANsight (embedded Web Server interface), VT100, Telnet,
SNMP, local supervisory port
INDUSTRY LISTINGS
Emissions: GR1089, Section 3
Safety: EN 60950
Canadian Safety: CSA C22.2 No. 950-95
DIAGNOSTICS
Performance: 15 min, 24 hr, and 30 day monitoring
(sampled every sec)
Network Loop: E1 network loopback
E1 Span Performance Statistics: ES, SES, CRC, LOSS, UAS,
CSS, BPVS, OOFS, AISS, RAS
Originate Ping
Email notification on trips
STATISTICS
Per Protocol
Tx/Rx frames
Tx/Rx octets
Rate peak
Rate average
Top talkers
ATM
Transmit and receive: cells, frames, errored frames, bytes
Opened VCCs
Unopened VCCs
TIMING
Internal, network, serial (6230 only)
POWER REQUIREMENTS
Voltage Input: 115 VAC: 120mA
Dissipation: 7 W maximum (4 BTU/hr)
MECHANICAL
Mounting: Stand-alone
Dimensions: 11.75 in. (29.845 cm) W, 1.86 in.
(4.724 cm) H, 8.75 in. (22.225 cm) D
Weight: 2.13 lb (0.97 kg)
ENVIRONMENTAL
Operating Temperature: 0 to 50 ºC (32 to 122 ºF)
Storage Temperature: -20 to 65 ºC (-4 to 149 ºF)
Humidity: 95% maximum, non-condensing
WARRANTY AND SUPPORT
Five-year warranty