Verso / Verilink
WANsuite 5130
5130 T1 Access Device & IP
Router
Look to DCE
for Verso / Verilink
. 17
The WANsuite® 5130 provides T1 / FT1 termination with a variety of integrated features such as TDM, Frame Relay, and IP Gateway. The unit's built-in Frame Relay test set saves time and money on installation. All these features come with the intelligence of Verso / Verilink’s Service Aware technology. This technology gives WANsuite the intelligence to provide network visibility up to Layer 3. Features such as Top Talkers allow network administrators to determine bandwidth requirements and plan for the growth of their networks. WANsuite’s intelligence is further enhanced by optional NetVoyantTM element management software. The flexibility and power of this unit make it a one-stop solution for cost-conscious network administrators.
Highlights
WANsuite 5130 T1 / FT1 CSU/DSU, Router
Network: 1, Data: 1 Software-selectable
PART NUMBER AND DESCRIPTION
1100003: WANsuite 5130 AC power
Cables and accessories included with unit:
9-1544-619-009: RJ-48/RJ-48 Pin to Pin, 9 ft
33-00221: DB-9M to DB-9F, 6 ft
SERIAL INTERFACE
DTE Port: Software-selectable V.35, EIA-530, RS-232
Data Rate: Sync: 1200 - 115200 bps and Nx64 (N=1 to
24); Async: 1200 - 115200 bps
Connection: DB-25 female
NETWORK INTERFACE
Line Rate: 1.544 Mbps (± 50 bps)
Data Rate: Nx56/64 kbps to 1.536 Mbps, where N=1 to
24 DSOs
Line Code: AMI or B8ZS
Line Framing: D4 or ESF
Protocol: TDM, Frame Relay, PPP
Connection: RJ-48C jack, 100 ohms ± 5%
Input Signal: DS1, +1 to -27 dB (ALBO)
Output Signal: 3.0 V
Mode: Long-haul (T1), short-haul (DSX)
DSX-1 Level: 0-110, 111-220, 221-330, 331-440, 441-
550, 551-660, >661 ft
Line Build Out: 0, -7.5, -15, -22.5 dB
Line Protection: 1000 V protection, fused input and output
per GR 1089
Jitter Control: per TR 62411 and T1.403
ETHERNET INTERFACE
Connection: 8-pin modular
Compatibility: 10/100 Base-T, Autosensing
Protocols: RIP1, RIP2, OSPF, TCP/IP, un-numbered
ADVANCED FEATURES
NAT/NAPT. PPP/NAPT
DHCP server/client
TCP server
IP Host Access List
MANAGEMENT INTERFACE
WANsight (embedded Web-server interface), VT100, Telnet, SNMPv.2,
local supervisory port, Ethernet port
INDUSTRY LISTINGS
FCC Compliance: Part 15 Subpart B, Class A, Part 68
US Safety: UL 1950 3rd Edition
Canadian Safety: CSA C22.2 No. 950-95
Industry Canada: CS-03, Issue 8
BellCore: GR-1089-Core Part 3
DIAGNOSTICS
Performance: 15-min, 24-hr, and 30-day monitoring (sampled every second)
Email notification
Originate Ping
Network Loops: Line, Payload, or Maintenance
DTE Port Loops: V.54 and Local
BERT: Marks, QRSS, 511, 2047, 215, and Spaces
T1 Performance Statistics: ES, SES, LOSS, UAS, CSS, BPVS, OOFS,AISS,
RAS
TIMING
Network 1, Network 2, Internal, Serial 1, Serial 2
POWER REQUIREMENTS
Power: AC 100-240 V / DC 18-150 V auto-ranging
MECHANICAL
Mounting: Desktop, rack, or wall
Dimensions: 11.75 in. (29.8 cm) W, 1.86 in. (4.7 cm) H, 8.75 in.
(22.2 cm) D
Weight: 2.1 lb (0.97 kg)
ENVIRONMENTAL
Operating Temperature: 0 to 50 ºC (32 to 122 ºF)
Storage Temperature: -20 to 65 ºC (-4 to 149 ºF)
Humidity: 95% maximum, non-condensing
Verso / Verilink’S SERVICE AWARE TECHNOLOGY
Layer 3 Statistics and Up: IP, PPP, TCP, UDP, FTP, TFTP, SNMP,
RIP1, RIP2, BootP, SMTP, HTTP, ICMP, OSPF, L2TP, H.323
Peak and Average Throughput on Up to 10 User Definable
Filters: DLCI, IP address, or IP port number
Top talkers
VERIFY SERVICE LEVEL AGREEMENTS (FRF.13)
Frame delivery ratio
Data delivery ratio
Round trip delay
Service availability in seconds
WARRANTY AND SUPPORT
Five-year warranty