Patton Electronics 460MC G.703 Balun, 2 Mbps, Built-in Cables 75-Ohm to 120-Ohm

Patton Electronics 460MC
G.703 Balun, 2 Mbps, With Built-in Cables (75-Ohm to 120-Ohm)

Patton Model 460MC

G.703 Balun, 2 Mbps, With Built-in Cables (75-Ohm to 120-Ohm)

Now you can connect our balun directly to 75-ohm connectors without using special cables. These baluns have 6-in. (15.2 cm) cables for maximum flexibility.

Features & Benefits

Solves G.703 termination mis-matches

Includes short cables that connect directly to equipment

Enables G.703 equipment to use RJ-11 wall plates and operate over standard building wiring

Low insertion loss, fully meets ITU-T (CTR12) G.703 standards

Very small size

Customized versions available upon request

Enclosed in flame retardant housings.

Baluns are 100% tested for reliability and durability

Overview

The Model 460MC miniature G.703 balun converts 75-ohm coaxial terminations to 120-ohm terminations, and vice-versa (see diagram below). It can also connect E1 hardware together over inter-building or campus twisted-pair wiring.

Model 460MC application diagram

The Model 460MC receives 75-ohm signals and converts to 120-ohm for transmission over a network or for reception by CPE equipment.

Signals output by the Model 460MC are scaled to match the pulse shape requirements specified in the ITU-T CTR12 G.703 standard.

Ordering Information

460MC G.703 balun; 120-ohm UTP (RJ-45F) to 75-ohm dual-BNC cables

Specifications

Transmission line: ITU-T CTR12 G.703
Data rate: 2.048 Mbps (models available for rates up to 155 Mbps, call for details)
Link-to-data isolation: 500 volts AC/DC
Temperature range: 32° to 122°F (0° to 50°C)
Dimensions: 0.8H x 1.7W x 2.7D in. (2.0H x 4.3W x 6.9D cm)