Patton Electronics 410 Twinax to Twisted Pair Adapter (Balun)

Patton Model 410

Twinax to Twisted-Pair Adapter (Balun)

Features & Benefits

Male connectors for the Twinax connection; RJ-11 or RJ-45 and screw terminals for the twisted pair (both included)
Data bandwidth of .5 to 5 Mbps (500 Kbps to 5 Mbps)
Range of up to 1000 feet (300m) of twisted pair - 24 gauge (.5mm)

Overview

Installing Twinax for IBM Systems 34/36/38 and AS/400 can be a headache! The cable is not only cumbersome to run through walls and over ceilings, it's also expensive! With the Patton Electronics Model 410, you can use regular, inexpensive twisted pair telephone wire instead of Twinax cable. It's cheap and easy to handle.

Ordering Information

Model 410M11?Twinax Balun with RJ-11 Jack	Model 410MTB?Twinax Balun with Terminal Block
Model 410M11TB?Twinax Balun with RJ-11 and Terminal Block	Model 410M11P?Twinax Balun w/ RJ-11 Plug on a 6 Foot Modular Cable
Model 410M45?Twinax Balun with RJ-45 Jack	Model 410M45TB?Twinax Balun with RJ-45 & Terminal Block

Specifications

Connectors: Male connectors for the Twinax connection; RJ-11 or RJ-45 and screw terminals for the twisted pair (both included)
Equipment: 5362, 5251, 5291 and all other terminals supported by the AS/400 and System 34-36-38 using twinax cable
Range: 1000 feet (300m) of twisted pair - 24 gauge (.5mm)
Transmission: Transparent to user
Data Bandwidth: .5 to 5 Mbps (500 Kbps to 5 Mbps)
Link to Data Isolation: 500 Volts AC or DC
Operating Temperature: 32? to 130?F (0-54?C)
Storage Temperature: 0? to 185?F
Humidity: To 95% Non-condensing
Dimensions: 5" long (12cm) x 1" (2.cm) diameter