Patton Model 2707
|
Lowest Cost G.703 Network Termination Unit (NTU)
|
This device terminates G.703 lines and provides serial and 10Base-T
interface conversion
|
|
|
|
|
Features & Benefits |
- Terminates E1 services
- Available in low-cost standalone or rack-mountable (2707RC) versions
- 2 Mbps data and line rate
- X.21, V.35, and Ethernet bridge options
- Switch-selectable AMI or HDB3 line encoding options
- Switch-selectable DTE/DCE modes for X.21 version
- 75-ohm dual coax and 120-ohm twisted-pair G.703 connections
- Local loopback diagnostics
- Internal, external and G.703 network timing
- CE approved
- 120/230 VAC & 48 VDC power options
- Conforms to ONP requirements CTR 12 for connection to international
telecom networks
- 1.6 km distance
|
|
Overview |
|
Today?s customers require low-cost network solutions that deliver high
speed connections to the Internet and Corporate Intranets while supporting
videoconferencing and many other wide-area services. The NetLink Model
2707 E1 NTUs satisfies those needs.
The NTUs terminate G.703 and connect to the customer?s router, FRAD,
CODEC, and switches with a V.35, X.21, or 10Base-T Ethernet interface.
The Model 2707/D (X.21 version) provides DTE/DCE functionality in the same
standalone or rack-mount package. This added versatility supports
operation in X.21 DTE applications (see diagram below) where an NTU is
needed to terminate G.703 and provide X.21/V.11 data to a multiplexer.
Our Ethernet version, the Model 2707/I offers 10Base-T bridging and
supports PPP and 802.1q VLAN tagging, passing vLAN-tagged packets of up to
1522 bytes. These features enable customers to extend a router's serial
interface and connect to a remote 10Base-T Ethernet LAN (see diagram
below). The 2707/I uses MAC learning and forwarding to provide seamless
LAN-to-LAN connectivity.
|
2707 /C/ 230: G.703 NTU/ Converter; V.35 (M34F) Interface; 230VAC
Power Supply
2707 /D/230: G.703 NTU/ Converter; X.21/V.11 (DB-15F) Interface;
230VAC Power Supply
2707 /C/120: G.703 NTU/ Converter; V.35 (M34F) Interface; 120VAC
Power Supply
2707 /D/120: G.703 NTU/ Converter; X.21/V.11 (DB-15F) Interface;
120VAC Power Supply
2707 /C/48: G.703 NTU/ Converter; V.35 (M34F) Interface; -48VDC
Power Supply
2707/D/48: G.703 NTU/ Converter; X.21/V.11 (DB-15F) Interface;
-48VDC Power Supply
2707RC/A/I: G.703 Rack Card NTU/Converter; V.35 (M34F) Interface
2707RC/D/D: G.703 Rack Card NTU/ Converter; X.21/V.11 (DB-15F)
Interface
2707RC/C/IA: G.703 Rack Card NTU/ Converter; 10Base-T (RJ-45F)
Interface
|
|
Data Rate: Smooth Clock 2.048 Mbps
Network Connector: RJ-48C (all versions); Dual Coaxial (X.21 and
Ethernet)
DTE Interface: X.21/V.11, V.35, or 10Base-T Ethernet
Line Coding: AMI or HDB3
Line Framing: G.703 (unframed)
Clocking: Internal, External or Receive Recover
Indicators: E1 Link Status, TD, RD, Loss of Sync, Error, Test Mode,
Ethernet Status (on 10Base-T Version)
Diagnostics: Local Loop
Line Isolation: 1500VRMS
Compliance: CE Mark, G.703, and CTR-12
Temperature: 32? to 122?F (0? to 50?C)
Rel. Humidity: 5 to 90% non-condensing
Dimensions: 5.84L x 4.16W x 1.51H in (14.84L x 10.6W x 3.84H cm)
Weight: 2.225 lbs (1.02 Kg)
|