|
Patton Electronics 2520
DigiLink III™ Switched-56
and Dedicated CSU/DSU
|
Patton Model 2520
|
|
DigiLink III™ Switched-56 and Dedicated CSU/DSU
|
|
All the Benefits of a Top-of-the-Line CSU/DSU Without a Top-of-the-Line
Price
|
|
|
|
|
|
|
|
|
Features & Benefits |
- Switched-56 and All Rate Dedicated Operation
- RS-232 and V.35 DTE Interfaces On Each Unit
- Desktop and Rack Card Versions Available
- Rate Adaptation, Anti-Streaming and Automatic Equalization
- V.54 Compliant Test Modes
- Special Control Port for Configuration and Diagnostics
- 5 Status LED Indicators—TD, RD, CTS, CD, DTR
- 4 Diagnostic LED Indicators—No Signal, Out of Service, Error and
Test Mode
- AT&T 62310 Compliant
|
|
|
|
Overview |
|
|
Patton’s brand new DigiLink III™ takes all the features of the DigiLink I™
and II and wraps them into one incredible package. Designed to support
both switched and dedicated lines, Patton’s DigiLink III™ is the best
choice for your most critical communication needs.
With its high speed capabilities, the DigiLink III™ can operate at all
data rates (2.4, 4.8, 9.6, 19.2, 56 and 64 Kbps). It also offers support
for both switched and dedicated lines and features nine easy-to-read LED
indicators. We've even included a special control port, which gives you
easy access to configuration and diagnostic utilities. State-of-the-art
SMT and ASIC chips enhance reliability and decrease power consumption.
We've also included a number of special tools. A specially designed
line equalization feature automatically compensates for distortion and
line attenuation. Meanwhile, V.54 local and remote loopback tests evaluate
the condition of the CSU/DSU and the communication link. The DigiLink III™
also features V.52 compliant bit error rate pattern tests.
And don't worry about getting the right interface version. The DigiLink
III™ comes custom equipped with both RS-232 and V.35 interfaces.
The Patton DigiLink III™ is fully compatible with the 4-wire DDS
services available from major service providers. It is also available in a
2U rack assembly with 110/220 or 48V DC power supply. |
Create Your Own Custom Built System with Our Miniature CSU/DSU Card
Great things do come in small packages! Just take a look at the new
miniature DigiLink III™ rack card. Offering all the features of the
DigiLink III™, the Model 2520RC conveniently fits into either Patton's
rack chassis or desktop ClusterBoxes™. In order to save space and money,
you can link up to sixteen Model 2520RCs in one convenient unit. You'll
finally be able to eliminate all that clutter! |
|
|
DDS Type: Dedicated Switched-56, DDS-All Rates
Transmission Format: Async./Sync.
Interface: RS-232 and V.35
Standards: AT&T compliant
Data Rate: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 56, 57.6 & 64 Kbps (DTE
Speeds); 2.4, 4.8, 9.6, 19.2, 56 64 Kbps (dedicated); 56 Kbps (switched)
Control Port: Configuration and diagnostics
Transmission Line: 4-wire
Applications: Point-to-point or multipoint
Indicators: LED indicators for TD, RD, CTS, CD, DTR, no signal, out
of service, error and test
Diagnostics: V.54 compliant local and remote loopback tests, V.52
compliant 511 BER tests, auto equalization, TELCO loops, remote testing
Connectors: DB-25 & M/34 SA; DB-25 or M/34 Rack Card
RX Level: 49 dB
Power Supply: 115/230V
Dimensions: 7.3" x 6.6" x 1.62" (18.5 cm x 16.7 cm x 4.1 cm) |
Patton Electronics Products
|
