|
Patton Electronics
1206P & 1206PRC
Powered, X.21, Modem Eliminator & Rack Card
|
Models 1206P & 1206PRC
|
|
Powered, X.21, Modem Eliminator & Rack Card
|
|
A cost effective solution for interconnection of terminal devices
located in proximity of each other
|
|
|
|
|
|
|
|
|
Features & Benefits |
- Provides Data Rates up to 2,048K bps to Both Terminals
- Allows the Connection of Two Synchronous or Asynchronous Terminal (DTE)
Units, Without the Use of Modems
- Female Connectors for Interfacing to Your DTE Equipment
- CTS Delay of 0 or 25 mS Selectable
- Sturdy Metal Enclosure
- Internal Linear Power Supply with a 110/220VAC Switch
- Available in Rackmount version (Model 1206PRC)
|
|
|
|
Overview |
|
|
The Patton Model 1206P Modem Eliminator is a cost effective solution for
interconnection of terminal devices located in proximity of each other.
The use of two modems is eliminated, with a resulting cost savings to the
user. This device is bidirectional with each port connecting to a DTE. The
MEs permit interfacing one terminal to another terminal without the use of
two Modems. The MEs provide sync baud rates up to 2,048Kbps. When an ME is
used with async data, baud rate selection is not required because the
Modem Eliminator is transparent to the data.
Terminal devices can be separated up to 50 feet away from the ME
depending on the baud rate selected. The unit is supplied with two female
connectors for connection of the terminal units. The MEs are available as
either a stand-alone units or in multiunit rackmount configurations. In
the stand-alone configuration, the MEs are housed in a sturdy aluminum
enclosure and are supplied with a switchable 110V / 220V linear power
supply.
In the rackmount configuration, each ME occupies one slot of the
1010R16/P front load rack. The rackmount version, Model 1206PRC, fits into
the 1010R16/P. The Modem Eliminators have internal linear power supplies
that operate at 110/220V switch selectable. No bulky wall mount power
transformers to clutter up your data center.
|
Ordering
Information
1206P: Powered X.21 Modem Eliminator; 110VAC, ME-X.21-SS
1206P-220: Powered X.21 Modem Eliminator; 220VAC, ME-X.21-SS
1206PRC: X.21 Modem Eliminator Rack Card, ME-X.21-RM |
|
|
Applications: Sync or Async, Terminal to Terminal Interconnection
Capacity: Two Channel Terminals
Data Format: Data Coding: Synchronous or Asynchronous
Data Interface: RS-232-C (V.24), X.21 (V.11) or V.35
CTS Delay: 0 or 20mS
Data Rates: V.24 - 450, 600, 900, 1200, 1.8K, 2.4K, 3.6K, 4.8K,
7.2K, 9.6K, 14.4K, 19.2K, 28.8K, 38.4K, 57.6K & 76.8K; V.35 or X.21 -
4.8K, 9.6K,14.4K, 19.2K, 28.8K, 38.4K,48K, 56K, 57.6K, 64K, 72K, 128K,
192K, 384K, 768K, 256K, 512K, 1.024M, 2.048M
Front Panel Indicators: Power, TXD, RXD, RTS, CTS, CD
RS-232 Physical Interface: Female DB-25 Connector (V.24), Female
DB-15 (X.21) or Female M-34 ( V.35)
Power Requirements: 120/200-240 VAC, 50/60 Hz, 0.16/0.08A, Switch
Selectable
Environmental: Oper Temp: 32° to 122°F (0° to 50°C); Rel Humidity:
5 to 90% non-condensing; Altitude: 0 to 10,000 feet
Dimensions: Height: 1.75 in (4.44 cm); Width: 8.90 in (22.60 cm);
Length: 10.00 in (25.40 cm)
Weight: 2.25 lbs (1.02 Kg) |
Patton Electronics Products
|
