Patton Electronics 1094A NetLink™, 1.152-Mbps, HDSL Modem DSL

Patton Model 1094A

NetLink™, 1.152-Mbps, HDSL Modem

This modem uses HDSL (high bit-rate digital subscriber line) 2B1Q technology to provide high speed two-wire connectivity for service providers and enterprise users.

Features & Benefits

Supports multiple line rates from 144 kbps to 1.152 Mbps

DTE speeds from 64 kbps to 1.024Mbps in increments of 64 kbps

Standards-based support (CE Mark)

Available with internal 90—260 VAC or -48 VDC power supplies

Built-in loopback functionality

A variety of modular interfaces.

Overview

Supporting line rates from 144 kbps to 1.168 Mbps, the NetLink 1094A provides “megabyte” speeds for leased lines, LAN-to-LAN interconnections, and WAN access networks located up to 4.6 miles (7.3 km) apart (see distance table below).

Model 1094A Distance Table

The 1094A standalone version supports DTE speeds from 64 kbps to 1.152 Mbps in 64-kbps increments. It includes built-in loopback diagnostics, in-band SNMP/HTTP remote management capabilities, and accessible (DIP) configuration switches.

Model 1094A Application Diagram

As a symmetric modem, the NetLink 1094A HDSL modem uses 2B1Q modulation to provide the same data rates in both directions over a single pair of regular telephone lines. Featuring replaceable DCE-DTE interface modules, the NetLink HDSL modem can support a wide range of applications, including Ethernet LAN bridging, G.703/G.704 line extension/termination and V.24/RS-232, V.35, RS-422/530, and X.21 interfaces.

A high density 2U-high rack card version of the NetLink HDSL modem (the 1094ARC is also available).

The Model 1094A is fully compatible with Patton's low-cost Model 1089 standalone modem.

Ordering Information

Base Units 1094A/xx/UI/z 1.0Mbps HDSL; 90—264VAC 1094A/xx/48 1.0Mbps HDSL; -48VDC Ordering combinations of standalone units and QuikConnect™ modules? Use the following key. QuikConnect™ Interface Modules
IM1/A V.24/RS232 serial port; DB-25F	IM1/B RS-422/530 serial port; DB-25F
IM1/C V.35 serial port; M/34F	IM1/D X.21 serial port DTE/DCE; DB-15F
IM1/F Co-directional 64K/G.703 on RJ-45F	IM1/I 10Base-T Ethernet port on RJ-45F
IM1/I4 Four 10Base-T ports each on RJ-45F	IM1/JO FXO interface module; voice/data
IM1/JS FXS interface module; voice/data	IM1/K G.703/G.704 on dual-BNC & RJ-45Fs

Specifications

Transmission: Synchronous, full-duplex, over one unconditioned twisted-pair (2 wires)
Line encoding: 2B1Q
DTE interface: See QuikConnect modules (above)
Distances & line rates: See transmission distances table (above)
Local Management: Configurable from DIP switches or via Model 1001MC card
Remote Management: SNMP configuration and management for local and remote modems via Model 1001MC Proxy Agent rack card; built-in HTTP server on Model 1001MC supports management via the Internet
Diagnostics: V.54 loops (LLB, RDL); V.52 compliant BER pattern generator and detector (511/511E)
Clocking: Internal, external, or receive recovered (network) clock
Power: 90–260 VAC, 50/60 Hz universal input; 48 VDC (10 Watts) optional)