Company

Employment

Contact

Hot Products

Sale Items

Repairs

Services

Tech Info

Returns

Used Gear

Warranty

Credit

Patton Electronics 1060
AC Powered, Asynchronous
Black Box Short-Range Modem (up to 115.2 kbps)

Patton Part # Black Box Part # Description
1060 ME935A  OPTOISOLATED SRM, ME935A 
1060-220 ME935AE  PX,OPTOISOLATED SRM, ME935AE 
1060RC11 ME931C-RJ11  Async srm w/ RJ11 rear card 
   
Patton Model 1060
AC Powered, Asynchronous, Short-Range Modem (up to 115.2 kbps)
For Flexibility, Performance and Price, You Can't Beat the Model 1060 in Async UTP or STP Applications!
 
Model 1060
 
  Features & Benefits
  • Data Rates to 115.2 bps
  • Distances to 14 Miles (22.5 Km)
  • Available In Desktop or Rack Card Versions
  • Point-to-Point or Multipoint Operation
  • Optically Isolated & Surge Protected
  • Local and Remote Analog Loopback Test Modes
  • External AC Power
  • Tri-State LED Status Indicators
  • Pin-Assignable Control Signals
  • Both RJ-11 and Terminal Block Line Interfaces
  • DCE/DTE Switch Selectable
 
Overview  

The Model 1060 AC Powered, Asynchronous Short Range Modem is Patton's most sophisticated async twisted pair short haul. The Model 1060 adapts to a wide range of applications, while providing the resources to deal with less-than-optimum conditions. Supporting either hardware or software flow control, the Model 1060 operates both point-to-point and multipoint. The Model 1060 handles data rates to 115.2 kbps, and supports distances to 14 miles (22.5 Km) over two twisted pair. Because the line side is optically isolated and surge protected, you can install the Model 1060 in environments where EMR or ground loops would normally prohibit twisted pair data communications. Local and remote loopback tests and front panel LEDs aid in troubleshooting, while externally accessible DIP switches let you configure the Model 1060 without opening the case. Assignable control signals and DCE/DTE switchability complete the picture.

 

Product Highlights


Miniature 1060 Card Fits Rack Chassis & ClusterBoxes™
The Model 1060RC puts all the power and flexibility of the Model 1060 standalone into a 2U high rack card. Using mid-plane architecture, Patton's rack and cluster systems offer interchangeable interface cards and modem "function" cards. You can even swap cards with the power on!

 

  • Low Profile Design Uses Only 2U of Rack Height
  • Hot-Swappable—Unplug the 1060RC Without Disconnecting Cables
  • Switchable Power Supply Accepts 115V or 240V AC
 
Specifications


Transmission Format: Asynchronous
Interface: RS-232 (CCITT V.24) DB-25 female
Transmission Line: 4-wire, unconditioned via RJ-11 or terminal blocks (RJ-45 optional)
Data Rate: 0 to 115.20 bps
Applications: Point-to-point or multipoint
Indicators: Tri-state indicators for Transmit Data, Receive Data, Control In and Control Out
Diagnostics: Loop 3 and 4, local and remote analog loopback
Power Supply: Wall-mount, 12VAC, 200mA
Dimensions: 4.17"W x 1.52"H x 5.0"L (10.6 x 3.9 x 12.7 cm)

Patton Products

     

1-301-924-7400
Sales Ext 17   Support Ext 25

© 2017 Data Connect Enterprise
3405
Olandwood Court
Olney, Maryland 20832