Patton Electronics 1018
Self-Powered, Asynchronous, Black Box
Short-Range Modem
with Extra Controls (SLIP/PPP)

Patton Model 1018
Self-Powered, Asynchronous, Short-Range Modem with Extra Controls (SLIP/PPP)
The Perfect Solution for Inexpensive SLIP/PPP Campus Internet Connections
 
Model 1018
 
Patton Part # Black Box Part # Description of the Product
   
1018F RJ11 ME680A-F  Line Driver - Dual Handshake 
1018F RJ45 ME681A-F  Line Driver - Dual Handshake 
1018F RJ11I ME680AE-F  Line Driver - Dual Handshake 
1018RC45 ME681C  LD - Dual Handshake Card 
1018M RJ11 ME680A-M  Line Driver - Dual Handshake 
1018F RJ45I ME681AE-F  Line Driver - Dual Handshake 
1018M RJ45I ME681AE-M  Line Driver - Dual Handshake 

 

 
  Features & Benefits
  • Async Data Rates from 1.2 to 57.6 kbps
  • 2-Pair Distances to 2.4 Miles (3.9km)(24 AWG/.5mm all data rates)
  • Passes Two Sets of Handshaking Signals: ?Session Control? (DTR/DCD) and ?Flow Control? (RTS/CTS)
  • V.54 Loopback Tests and V.52 BERT Pattern Generator/Detector
  • Easy-to-Read LED Status Indicators
  • Plugs Directly into an RS-232 Port
  • External AC Power Supply
  • Transformer Isolated and Surge Protected
  • Available in Rack Card Version
 
Overview  

The Model 1018 async short range modem is able to pass two discrete sets of handshaking signals: DTR & DCD are used to control the point-to-point session, while RTS & CTS are used for flow control. This capability?combined with the Model 1018?s ability to support RS-232 data rates up to 57.6 kbps over two twisted pair?makes the Model 1018 perfect for inexpensive campus Internet links. Just use a plug-in Model 1018 at each remote computer, a rack of Model 1018RC cards at the central site, and connect them with 2-pair copper wire at up to 2.4 miles (3.9km)!

 

 
Specifications


DTE Transmission Format: Asynchronous
Transmission Line: Unconditioned twisted pair 19 - 26 AWG (.4mm)
Link Clocking: Internal
Distance: 2.4 miles (3.9km) at all data rates
DTE Data Rates: 1.2, 2.4, 4.8, 9.6, 19.2, 28.8, 38.4 and 57.6 Kbps (switch selectable)
Interfaces: EIA RS-232 / CCITT V.24
Control Signals: DTR/DCD (Session Control), RTS/CTS (Flow Control)
Carrier: ?Constantly on? or ?Controlled by DTR?
Surge Protection: 600W power dissipation for up to 1 msec
Isolation: Minimum 1500 V RMS using isolation transformers
Connectors: DB-25 female or male on RS-232 side; RJ-11 or RJ-45 on line side
Power Supply: 7.5V DC wall mount transformer
Temperature Range: 32-122?F (0-50?C)
Dimensions: 3.55? x 2.1? x .80? (9.0 x 5.3 x 2.0 cm)

Patton Electronics Products