 |
|
|
|
|
|
|
||
|
|
|||
|
|
|||
| ||||||||||||
|
Kentrox
DataSMART MAX T1 Quad-port Add Drop Kentrox DataSMART MAX T1 Quad-port Add/Drop Description DataSMART® MAX™ T1 / FT1 multi-port DSU/CSUs from Kentrox help you consolidate traffic at remote sites, and save access charges month after month. By leveraging unused bandwidth and merging voice, data and video traff c onto a single T1 link, you can reduce the number of T1 / FT1 lines needed for WAN access. DataSMART MAX DSU/CSUs maximize your network uptime with convenient features, such as optional 10Base-T Ethernet for simplifi ed management. Each DSU/CSU includes a frontpanel LCD for easy local setup and management, along with support for standards-based SNMP management. Features • Voice, data and video multiplexing Easy installation and diagnostics
Ordering Information
Specifications NETWORK INTERFACE Line Rate: T1 (1.544 Mbps) Framing: SF, ESF, Ericsson Line Code: AMI, B8ZS Input Signal: DS-1 from 0 dB to -27 dB, typical Output Signal: DS-1 with LBO 0, -7.5, -15 dB (selectable) Mechanical: DA15 plug Lightning Protection: Withstands lightning surges defi ned per FCC Part 68, and recovers TERMINAL INTERFACE (ADD/DROP PORT) Line Rate: T1 (1.544 Mbps) Framing: SF, ESF, Ericsson Line Code: AMI, B8ZS Input Signal: DSX-1 to -10 dB Output Signal: DSX-1 with equalization Mechanical: DA15 socket DATA PORT INTERFACE (SELECTABLE) Bit Rate: Nx56 kbps or Nx64 kbps (N=1...24) Electrical: V.35 compatible, DB25 socket or EIA-530/RS449, DB25 socket MANAGEMENT Control Ports: DCE and DTE EIA-574 DE9 socket and plug Daisy chain 38.4 kbps maximum English menus Async ASCII or SLIP Ethernet Connection: Optional 10Base-T PCMCIA adapter SNMP Agent:MIB II (RFC 1213) DS1 MIB (RFC 1406) Enterprise MIB TELNET server Responds to PING Security fi lters (for IP source addresses) Up to 10 SNMP Trap hosts In-band: Via external router In-band Menus: Via external router ALARMS Traps: SNMP Traps via SLIP or via Ethernet ASCII: Transmitted out async control port DIAGNOSTICS LEDs: Network interface status, terminal interface status, data port status, power/fail, test active LCD: Front panel for confi guring, testing, and display of unit status Loop Tests: Line loopback, payload loopback, local loopback, terminal loopback, data terminal loopback, data port loopback Line Test Codes: QRS, 3-in-24, 1-in-8, All 1s, All 0s Data Test Codes: 511, 2047 BERT Tester: Independent BERT on all test codes Monitor Jacks: Network interface, transmit and receive PERFORMANCE MONITORING Data Storage: Last 24 hours of data in 15 minute increments; last 7 days of data in 24-hour increments Monitors: Network and terminal interface Registers Reports: Separate for carrier and user Based on G.821 for performance Far end, alarm history, and network interface statistical reports COMPATIBILITY AT&T: TR 54016-1989, TR 62411-1990, TR 54019A PUB 43802 ANSI: T1.403-1995 Bellcore: TR.194 REGULATORY FCC Compliance: Part 68; Part 15, Class A NRTL Listed: UL 1950, 3rd Edition CSA: 22.2; No. 950 IC: CS-03 ENVIRONMENT Operating: 0° to 50° C 5% to 90% RH, non-condensing Storage: -20° to 66° C, 5% to 95% RH POWER AC: 110 to 240 VAC, 50 or 60 Hz, 18W DC: 24 to 48 VDC, 14W, dual power inputs PHYSICAL Usage: Desktop or rack mount (19" or 23") Dimensions: 17.5" W x 1.72" H x 11.5" D Weight: 7 lbs. (approximate) |
