|
Manufacturer |
Hewlett Packard |
Manufacturer Part Number |
J8133A#ABA |
Product Line |
ProCurve |
Product Name |
ProCurve 520wl Wireless Access Point |
Marketing Information |
The HP ProCurve Wireless Access Point 520wl extends the range of your cabled
Ethernet environment to an entire building or campus by providing easy
network access for mobile users or for hard-to-wire locations, such as
conference rooms. The Access Point 520wl is a high-performance bridge that
features roaming, automatic channel selection, and Web-based configuration
and management. It cost-effectively responds to the growing demands of
enterprise and small-business users for anytime, anywhere access to files,
e-mail, and the Internet. The Access Point 520wl supports up to 250 wireless
clients per radio slot and 64- and 128-bit RC4 Wired Equivalent Privacy (WEP)
encryption. |
Manufacturer Website Address |
www.hp.com |
|
Device Type |
Wireless Access Point |
Processor Type & Speed |
1
x Intel SA110 233MHz |
Memory |
16MB SDRAM
8MB Flash Memory
|
Ports |
1 x RJ-45 10/100Base-TX LAN
1 x DB-9 Console Management
|
Connectivity Media |
Twisted Pair |
Data Transfer Rate |
10Mbps Ethernet
100Mbps Fast Ethernet
|
Security |
2-user VLAN support
RADIUS access control
MAC access control table
Protocol filtering
Static MAC filtering
Multicast/Broadcast storm filtering
|
Expansion Slots Details |
CardBus 2 |
Modules |
Not Included |
Management |
HTTP server interface for configuration and management
Telnet/CLI
SNMP agent
TFTP
DHCP client
DHCP server
Proxy ARP
ICMP echo response
Hardware watchdog timer
Emergency reset to default configuration
Web interface:
Microsoft Internet Explorer 5.5 or higher
Netscape Navigator 6.0 or higher
|
Stackable |
Not Applicable |
|
Wireless Technology |
IEEE 802.11a/b |
Antenna |
Not Included |
Antenna Range |
Not Applicable |
Frequency Band/Bandwidth |
Not Applicable |
Access Method |
CSMA/CA |
Channels |
Not Applicable |
Transmission Speed |
Not Applicable |
Delay |
Not Applicable |
Transmit Power |
Not Applicable |
Receiver Sensitivity |
Not Applicable |
Wireless Security |
64 and 128-bit WEP encryption
|
Modulation |
Not Applicable |
|
Input Voltage |
100 to 240V AC |
Input Current |
0.7A |
Frequency |
50
or 60Hz |
Power Supply |
External |
|
Temperature |
32 to 104°F (0 to 40°C) Operating
14 to 122°F (-10 to 50°C) Storage
|
Humidity |
95% Maximum Non-condensing Relative Humidity Operating
95% Maximum Non-condensing Relative Humidity Storage
|
|
Additional Information |
Applicable to the 802.11a network:
- Fragmentation support for 802.11a network
- Up to 50 stations per radio control
Applicable to the 802.11b network:
- Up to 250 stations per radio card
- WEPplus (weak key avoidance)
- WDS (wireless distribution system) relay
- Remote link test
- Link test responder for 802.11b network
- Medium density distribution
- Ultra high cell density support
- Closed system
- Interference robustness
- Load balancing on 802.11b network
Spreading: 11-chip Barker Sequence
Bit error rate (BER): better than 10-15
Antenna: 0-180 degrees articulation
Delay spread frame error rate >1%
|
Bill of Materials |
HP ProCurve 520wl Wireless Access Point
Metal mounting plate for placement on wall, ceiling, or table
|
Certifications & Standards |
IEEE 802.3
IEEE 802.3U
IEEE 802.11b
IEEE 802.11a
IEEE 802.11d
IEEE 802.1x
Safety:
CSA 22.2 No. 60950
EN/IEC 60950
UL 60950
UL 2043
Emissions:
EMC
CISPR 22 Class B
EN55022
EN55024
AS/NZS3548
CNS13438
FCC CFR 47 Part 15
|
|
Form Factor |
Wall-mountable
Desktop
|
Dimensions |
2.0" Height x 10.2" Width x 7.3" Depth |
Shipping Dimensions |
6"
Height x 11.5" Width x 14.5" Depth |
Weight |
3.86 lb |
Shipping Weight |
7
lb |
|
Standard Warranty |
Lifetime |
Additional Warranty Information |
For as long as you own the product with next-business-day advance
replacement |