GDC Innovx NetPath ADSL2/2+
SOHO Ethernet Router / Bridge



Call us for Pre-sales and discount pricing

  301-924-7400 Support

Introduction

The NetPath ADSL2/2+ is a feature-rich ethernet router/bridge that is ideal for home and SOHO settings. It supports the latest ADSL technology ADSL2 & ADSL2+, which combines high-speed throughput with routing and bridging function in single device for high-quality, and high-speed access to the Internet. A 10/100Based-T Ethernet interface, or the optional USB interface supports flexible applications.

The NetPath ADSL2/2+ gives Telecom operators, ISPs and subscribers significantly improved bandwidth delivery for multimedia services, such as voice, data and video on demand. The NetPath ADSL2/2+ provides downstream data rates of up to 26 Mbps, and an upstream rate of up to 1 Mbps to and from subscribers.
ISPs and Telecom Operators can easily add new subscribers to the existing networks. Standards-based and versatile, the Netpath ADSL2/2+ offers the security, management and ease-of-use required at Central Offices and subscriber locations.

Features and Benefits

? ANSI T1.413 issue 2 of ITU-T
    G.992.1 (G.DMT, full rate) Annex A or B or C
    G.992.2 (G.lite)
    G.994.1 (G.hs, Multimode)

? RFC 1483/2684 (Mult Protocol over ATM PVC, Bridged & Routed PDU for LLC/SNAP & VC Mux encapsulation)
? RFC 1577 (Classic IP over ATM, MTU=1500)
? RFC 2364 (PPP over ATM, LLC/ SNAP & VC Mux encapsulation)
? RFC 2516 (PPP over Ethernet)
? Optional built-in POTS Splitter
? Optional USB port

Specifications

Physical & Electrical Specifications

Dimensions
Length: 185 mm, Width: 135 mm, Height: 35 mm
Weight: 330 grams
Environmental Characteristics
Operating Temperature: 0 to 60 deg. C
Relative Humidity: 5% to 95%, non-condensing

Hardware Interface

One RJ-11 port for ADSL connection
One RJ-45 connector for IEEE 802.3u 10/100M LAN connection
One USB Port (Optional)
One Power Jack for 7.5V/1A DC Adaptor

ADSL Compliance

Multi-Mode ADSL / ADSL2 / ADSL2+ Standards
ADSL: Full-rate ANSI T1.413 Issue 2
ITU-T G992.1 (G.dmt) standards
Splitter-less ITU-T G.992.2 (G.lite) specification
ADSL2: ITU -T G.992.3 (G.dmt.bis) compliant for ADSL2
ADSL2+: ITU-T G.992.5 compliant for ADSL2+
Auto-negotiating rate adaptation
ADSL:
Maximum downstream rate of 8 Mbps;
Maximum upstream rate of 1 Mbps
ADSL2:
Maximum downstream rate of 12 Mbps;
Maximum upstream rate of 1 Mbps
ADSL2+:
Maximum downstream rate of 24 Mbps;
Maximum upstream rate of 1 Mbps
ADSL2+ Ext:
Maximum downstream rate of 26 Mbps;
Maximum upstream rate of 1 Mbps
Interoperable with all major DSLAM equipment
DSL Forum CPE Auto Configuration TR-037
Supports Dying Gasp (optional)

ATM Protocols

PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Classical IP over ATM (RFC 1577)
Bridged / Routed Ethernet over ATM (RFC 1483/RFC2684)
ATM Forum UNI 3.0, UNI 3.1 plus IISP Signaling, and UNI 4.0
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaptation Layer Type 5)
OAM F4/F5
Up to 8 virtual circuits

Operational Specifications

Bridge Mode

Ethernet to ADSL self learning Transparent Bridging (802.1d)
Supports up to 128 MAC learning addresses
MAC address spoofing
Spanning Tree Protocol 802.1d
Ethernet Bridge Filtering
Multi-homing (IP Aliasing)
IP multicast (IGMP)
IGMP Proxy

PPP Support

PPP (RFC 1661)
PPP over AAL5 (RFC 2364)
PPPoE (PPP over Ethernet, RFC 2516)

Router Mode

IP Routing, RIP v1, v2
Static Routing
DNS Proxy
Port Forwarding
DHCP (Dynamic Host Configuration Protocol) server and client
NAT / NAPT / Dynamic NAPT support
ICMP (Internet Control Message Protocol)
IGMP (Internet Group Management Protocol)

Security

Password protected system and configuration management
802.1x Access Control
User Authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Handshake Authentication Protocol)
Stateful Packet Inspection Firewall
Intrusion detection and DoS attack controls
DMZ Ports
Extensive ALG support

Management

Web-based environment for easy configuration and management
WAN and LAN side connection statistics
Configurable static routes, routing table, and VCs (virtual circuits)
Configurable NAT/NAPT
PPP User ID and password
Supports Text-based management via Telnet access
Supports TFTP (Trivial File Transfer Protocol) and FTP for firmware
upgrade, configuration backup, and restoral
Supports SNMP v1, v2, v3 Agent
Supports SNMP v2 MIB

GDC Products Page

 Purchase orders accepted on General DataComm equipment

Contract Buying and Volume Discounts available !!

Please contact us 301-924-7400