The Draytek Vigor2930 is a dual-WAN router with
policy-based load balance, fail-over and BoD (Bandwidth on Demand); it
also features advanced bandwidth control mechanisms such as IP-layer QoS,
NAT session limitation, bandwidth borrowed, etc., to allow easy,
flexible and reliable access control and bandwidth management.
The Draytek Vigor 2930 SPI (Stateful Packet Inspection) firewall uses
object-based design to make settings of firewall policies easy. The CSM
(Content Security Management) feature enables more precise and efficient
access control for IM (Instant Messenger) and P2P (Peer to Peer)
applications. Furthermore, functions such as DoS / DDoS (Denial of
Service / Distributed DoS) and URL / Web content filtering minimize
security threats both inside and outside the network.
With hardware-based implementation of the VPN protocols, the Draytek
Vigor 2930 supports up to 100 VPN tunnels in compliance with advanced
protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES /
3DES for encryption and MD5 / SHA-1 for authentication.
The
DrayTek Vigor2930 "n" model (Draytek Vigor 2930n) conforms to IEEE
802.11n Draft-n standards. Supporting WEP / WPA / WPA2 encryption, MAC
address control, wireless LAN isolation, wireless VLAN and 802.1X
authentication. The wireless rate control function can adjust the data
rate of each wireless station (client). WDS can help users to extend
wireless coverage easily.
The DrayTek Vigor 2930 ?Vn? (Draytek Vigor2930Vn) model incorporates
twin analog phone ports.
Dual WAN Application
It allows users to access Internet and combine the bandwidth of the dual
WAN to speed up the transmission through the network. Each WAN port can
connect to different ISPs, Even if the ISPs use different technology to
provide telecommunication service (such as DSL, Cable modem, etc.). If
any connection problem occurred on one of the ISP connections, all the
traffic will be guided and switched to the normal communication port for
proper operation.
Firewall & VPN
Application
The SPI ( Stateful packet Inspection ) firewall uses object-based design
to make settings of firewall policies easy. The CSM ( Content Security
Management ) feature enables more precise and efficient access control
for IM ( Instant Messenger ) and P2P ( Peer to Peer ) applications.
Furthermore, functions such as DoS / DDoS ( Denial of Service /
Distributed DoS ) and URL / Web content filtering minimize security
threats both inside and outside the network.
With hardware-based implementation of the VPN protocols, the Draytek
Vigor2930 supports up to 100 VPN tunnels in compliance with advanced
protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES /
3DES for encryption and MD5 / SHA-1 for authentication.
Specifications
Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD (Bandwidth on Demand)
- WAN Connection Fail-over
WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
- L2TP *
Firewall
- CSM ( Content Security Management ) for IM /
P2P Applications
- Multi-NAT, DMZ Host, Port-Redirection and
Open Port
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection )
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
VPN
- Up to 100 VPN Tunnels
- Protocol : PPTP , IPSec , L2TP , L2TP over
IPSec
- Encryption : MPPE and Hardware-Based AES /
DES / 3DES
- Authentication : Hardware-Based MD5 , SHA-1
- IKE Authentication : Pre-shared Key and
Digital Signature ( X.509 )
- LAN-to-LAN , Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection ( DPD )
- VPN Pass-Through
Quality of Service
- QoS o Guarantee Bandwidth for VoIP
o Class-based Bandwidth Guarantee by User-Defined Traffic Categories
o DiffServ Code Point Classifying
o 4-level Priority for each Direction ( Inbound / Outbound )
o Bandwidth Borrowed
- Bandwidth / Session Limitation
Network Management
- Web-Based User Interface ( HTTP / HTTPS )
- Quick Start Wizard
- CLI ( Command Line Interface, Telnet / SSH )
- Administration Access Control
- Configuration Backup / Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP / FTP
- Logging via Syslog
- SNMP Management MIB-II
Content Filter
- URL Keyword Blocking ( White List and Black
List )
- Java Applet , Cookies , Active X , Compressed
, Executable , Multimedia File Blocking
- Web Content Filter ( SurfControl )
- Time Schedule Control
Network Features
- DHCP Client / Relay / Server
- Port-based VLAN
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache / Proxy
- UPnP
- Routing Protocol o Static Routing
o RIP V2
DrayTek Products